tq6410制作文件系统，烧进去不能启动

[img]C:\Documents and Settings\Administrator\桌面\PORCT[P55D(JT6T}73}DHP.jpg[/img]

802.1Q VLAN Support v1.8
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
s3c-rtc s3c64xx-rtc: setting system clock to 2031-05-21 16:32:09 UTC (1937147529
)
Initializing network drop monitor service
UBIFS error (pid 1): validate_sb: min. I/O unit mismatch: 2048 in superblock, 40
96 real
UBIFS error (pid 1): validate_sb: bad superblock, error 1
List of all partitions:
1f00            1024 mtdblock0  (driver?)
1f01            2048 mtdblock1  (driver?)
1f02            4096 mtdblock2  (driver?)
1f03         2089984 mtdblock3  (driver?)
1f04         2033136 mtdblock4  (driver?)
No filesystem could mount root, tried:  ubifs
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Backtrace:
[<c009cf9c>] (dump_backtrace+0x0/0x110) from [<c04e85dc>] (dump_stack+0x18/0x1c)

r6:00008000 r5:ccc1b006 r4:c0703748 r3:79f6f35f
[<c04e85c4>] (dump_stack+0x0/0x1c) from [<c04e89c4>] (panic+0x5c/0x180)
[<c04e8968>] (panic+0x0/0x180) from [<c0008edc>] (mount_block_root+0x1e4/0x244)
r3:ccc2ff44 r2:00000020 r1:ccc2ff74 r0:c063763d
r7:c0027a18
[<c0008cf8>] (mount_block_root+0x0/0x244) from [<c00090b8>] (prepare_namespace+0
x94/0x188)
[<c0009024>] (prepare_namespace+0x0/0x188) from [<c0008adc>] (kernel_init+0x100/
0x130)
r5:c00271f8 r4:c00271f8
[<c00089dc>] (kernel_init+0x0/0x130) from [<c00b4e7c>] (do_exit+0x0/0x690)
r5:c00089dc r4:00000000

上面是开发板的终端信息，我把光盘的文件系统源文件我没有改，步骤耶稣按照手册做的，这个是我pc的截图

哈哈，，问题解决了，，，原因是p后面的参数错误，，，昨天我着急，没有仔细看提示，现在改过来了，盖因这句
Initializing network drop monitor service
UBIFS error (pid 1): validate_sb: min. I/O unit mismatch: 2048 in superblock, 40
96 real
UBIFS error (pid 1): validate_sb: bad superblock, error 1
我之前设的是2048，提示说4096正确，改过来了，就能启动了，哈哈

亲，教程里面给了参数说明的啊，呵呵，下次要仔细了，注意细节。