急！新手提问。求高手解答

刚刚买到TQ2440的开发板，做测试的时候出现了问题，希望高手能指点迷津。
  输入t后，将zimage_2.6.25.8_Q35_64MB拷入后，然后将开关拨到NAND，开机后出现以下问题。不知道那个地方错了，那个yaffs怎回事。
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
s3c2440-sdi s3c2410-sdi: powered down.
UDA1341 audio driver initialized
Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16.
ASoC version 0.13.2
ALSA device list:
  No soundcards found.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
s3c2410-rtc s3c2410-rtc: setting system clock to 2008-11-08 07:08:51 UTC (12261)
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs2
block 27 is bad
VFS: Mounted root (yaffs filesystem) readonly.
Freeing init memory: 176K
Warning: unable to open an initial console.
Failed to execute /linuxrc.  Attempting defaults...
Kernel panic - not syncing: No init found.  Try passing init= option to kernel.

既然你是刚刚买到TQ2440的开发板，那么你的NAND FLASH肯定是256MB的，所以你烧zimage_2.6.25.8_Q35_64MB这个文件肯定就不对了！应该怎么做，我想你应该明白了吧？


/*****************************************************************/
包邮 TQ2440开发板(256MB FLASH)+东华3.5寸触摸屏+12DVD资料+送USB转串口+铜柱=580
http://item.taobao.com/auction/i ... 5708bea5401ef74.htm
/*****************************************************************/

烧录256M的也是同样的错误了

2# cmasp


问题已经解决，谢谢！

只少了zImage（内核镜像），那文件系统为什么不烧写呢？