移植带有QT的文件系统，找不到屏幕触摸驱动

按照QT开发手册前两章操作的，然后移植也成功了，但是系统启动后在触摸屏上触摸没起作用，希望管理员能帮忙看一下，下面是启动时PC机上终端的结果：
s3c2440-nand s3c2440-nand: Tacls=2, 20ns Twrph0=3 30ns, Twrph1=2 20nsash Main Menu  #####0)
s
[l] Se
[t] Test Linux Image (zImage)ord
###
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit-bootq90

[1] Download u-boot or STEPLDR.nb1 or other bootloader to Nand Flashbl
)[
NAND_ECC_NONE selected by board driver. This is not recommended !! Download Eboot (eboot.nb0) to Nand Flash Main Menu  ###

[1] Down
Scanning device for bad blocksd Linux Kernel (zImage.bin) to
Creating 3 MTD partitions on "NAND 64MiB 3,3V 8-bit":0000terfa
[5] Download CRAMFS image to Nand Flashand
0x000000000000-0x000000040000 : "EmbedSky_Board_uboot"image (root.bin) to Nand Flashin) to Nand Flash2] Down
0x000000200000-0x000000500000 : "EmbedSky_Board_kernel"or TQ2440_Test) to SDRAM and Run itad Linux Kernel (zIm
0x000000500000-0x000004000000 : "EmbedSky_Board_yaffs2"he systemegist
Den
[5] Downl
[9] Format the Nand Flashl
ohci_hcd: USB 1.1 'Open' Host Controller (OHCmeters                           
         
[6] Download YA
pl2303: Prolific PL2303 USB to serial adaptor driveroad Eboot (eboot.nb0) to Nand
[7] Download Program
s3c2410_udc: debugfs dir creation failed -19x Kernel (zImage.bin) to Nand Flashock
[7] D
s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytesNand Flash s3c2410-wdt: wa
SCSI sub
[0] Set the boot parameters systemge (
mice: PS/2 mouse device common for all miceeg: uCOS-II or TQ2440_Test)Set the boot par
TQ2440 TouchScreen successfully loaded[b] Download LOGO Picture (.bin) to Na
input: TQ2440 TouchScreen as /devices/virtual/input/input0] Set LCD Parameters LOGO Picture (.bin) t
[n] Enter TFTP
S3C24XX RTC, (c) 2004,2006 Simtec Electronicsl] Se
[r] Reboot u-boota] Download User
[t]
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enablingnte
[q] quit from menuoot u-bootte
[b] D
Enter you
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0ected yet.from menuSB
[l] Set LCD Par

Camera Drivereg: uCOS-II o
w9968cf: V4L driver for W996[87]CF JPEG USB Dual Mode Camera Chip 1:1.34-basicdownload
[6] Download YAFFS image (root.bin) to Nand Flashboot u-bootry: 488Kx
usbcore: registered new interface driver w9968cfm (uCOS-II or TQ2440_Test) to SDRAM and Run it.3
usbcore: registered new interface driver zr364xxu

#####    Bo
[8] Boot the systemin Menu  #####
zr364xx: Zoran 364xxNand Flashm menuhous
usbcore: registered new interface driver stkwebcami
insm

#####    Bo
[a] Download User Program (eg:
sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49USB downlo
[b] Download LOGO Picture (.bin) to Nand  FlashSky mod_

usbcore: registered new interface driver sn9c102D Parametersr to Nand FlashE401 us
[n] Enter TFT
et61x251: V4L2 driver for ET61X[12]51 PC Camera ControlleReboot u-bootot.nb0) to      
                        
gspca: main v2.5.0 registered0 (ARMv4T), cr=c0007177r to N
usbcore: registered new interface driver conex30.
CPU: VIVT data cache, VIVT instruction cac
conex: registered Nand Flashotload
usbcore: registered new interface driver etoms_INITRD is deprecated; please update your boot
etoms: registerednb0) to Nand Flas
usbcore: registered new interface driver finepixdisabled, Data cache writeback.bin) to Nand F
[6
finepix: registeredge (root.bi
CPU S3C
usbcore: registered new interface driver marsnd
S3C24XX Clocks, (c) 2004 Simtec Electroni
mars: registeredDRAM and Run itt
usbcore: registered new interface driver mr97310a.000 MHz, peripheral 50.000 MHztemogram (uCOS-II
mr97310a: registeredand Flashun it2, io
usbcore: registered new interface driver ov519PLL on, UPLL on] Boot
[a] Download User Progr
ov519: registered TQ
Built 1 zonel
usbcore: registered new interface driver ovetersB
                                   
usbcore: registered new interface driver sonixblearing subpending status 00000002###    Boot f
sonixb: registeredMenu  ##
PID hash
usbcore: registered new interface driver sonixj EmbedSky USB download mode     ##### Main
Con
sonixj: registereddevice 80x30
Ple


usbcore: registered new interface driver spca500abledr to Nand Flashetoms: reg
Dentry cache hash
spca500: registered (order: 3, 32768 b
usbcore: registered new interface driver spca501** Warning -
s3c
Inode-cache hash table entries
spca501: registered384 bytes)n) to Nan
usbcore: registered new interface driver spca505et
Memory: 64MB = 64MB totalFS image to Nand Fla
spca505: registeredB available (4428K
usbcore: registered new i                       
usbcore: registered new interface driver sq905c] Download LOGO Picture (.bin) to
S3C2440: Init
sq905c: registeredre to
[a]
[b] Dow
usbcore: registered new interface driver sunplus....
[n] E
S3C24XX DMA Driver, (c) 2003-2004,200
sunplus: registeredict
[r] Reboot u-bo
usbcore: registered new interface driver stk014el 0 at c4808000, irq 33ot u-b
[q] quit from me
stk014: registerednel 1 at c4808040,
usbcore: registered new interface driver t613hannel 2 at c4808080, irq 35selection:Q24
spc
t613: registeredDMA channel 3 at
usbcore: registered new interfaf                 
         
[r] Reboot u-bootownlo
[0
u
[l] Se
[t] Test Lin
usbcore: registered new interface driver QCM048 (order: 1, 8192 bytes)camring subp
Enter
usbcore: registered new interface driver s2255h tables configured (established 2048 bind 204
usbcore: registered new interface driver uvcvideoedSky US
TCP reno registered#####r

#####    Bo
N
USB Video Class driver (v0.1.0)[1] Download u-boot or STEPLDR.
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics    #####Controllers v1:1.0
msgmni has been set to
s3c2410-wdt s3c2410-wdt: starting watchdog timerdrng (krng) to Nand Flashface driver et61
io sch
s3c2410-wdt s3c2410-wdt: watchdog active, reset abled, irq enabledboo
Console: switching to colour frame buffer device 100x30to Nand
mapped channel 0 to 0ernel (zImage.bin) to
s3c2440-sdi s3c2440-sdi: powered down.eo Nand Flashnd
STV06xx:
[5] Downlo
ba
s3c2440-sdi s3c2440-sdi: initialisation done.Control initializedTest                    
P
s3c2410-rtc s3c2410-rtc: setting system clock to 2010-07-16 17:01:17 UTC (127929004 Simtec ElectronicsFFS image (root.bin) to Nand Flashwnload Linux K
s3c2440-n
9677)c2440
yaffs: dev is 32505858 name is "mtdblock2"2 20nsQ2440_Test) to SDRAM and Run itMFS i
yaffs: passed flags ""reds frequ
NAND device
yaffs: Attempting MTD mount on 31.2, "mtdblock2"AND 64MiB 3,3V 8-bit Nand Flash2c: i2c-0: S3C
ov
yaffs_read_super: isCheckpointed 0s(uCOS-II or TQ24
)_
NAND_ECC_NONE
VFS: Mounted root (yaffs filesystem) on device 31:2.: v
ov534: registeredri
[8] Boot the systemore: re
[
Freeing init memory: 488Kvice for bad blockshr Ver
Warning: unable to open an initial console.itions on "NAND 64MiB 3,3V 8-bit": User Pro
Try to bring eth0 interface up ...No device
0x000000000000-0x0000000
ifconfig eth0 hw ether 10:23:45:67:89:abt Linux Image (zImage)ashd new interface
eth0: link down00-0x0000005000


##### EmbedSky BIOS for SKY2440/TQ2440 ##### s3c2410-ohci: irq 42, io mem 0x49000000 Nan
Press Space key to Download Mode ! n
spca505: r
usb usb1: configurat
Booting Linux ... 1 choiceashand F
Copy linux kernel from 0x00200000 to 0x30008000, size = 0x00300000 ... Copy Kernashin) to N
hub 1-0:1.0: 2 ports detectedstered new
[7] Download Prog
Initializ
el to SDRAM done,NOW, Booting Linux......mt
spca508: registeredontro
usbcore: regi
Uncompressing Linux.............................................................lashl

[7]
USB Mass Storage support registered.parameters                       
S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHztc0cturer ID: 0xec, Ch
[7] Download Program (uCOS-II or TQ24
i2c /de
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL onapture interface: v2.00gram (uCO
[8] Boot the system
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256istered new interface driver cx231xxface driver u

[a] Download User Progr
Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySAC0l
[a]
[b] Download LOGO Picture

USBVision USB Video Device Driver for Linux : 0
NR_IRQS:85oard_uboot
irq: clearing pending ext status 00080000re: registered new interface driver ov511
irq: clearing subpending status 00000002u-boo
ov511: v1.64 for Linux 2.5:ov511 U
PID hash table entries: 256 (order: 8, 1024 bytes) from menuoot u
SE401 usb camera driver version 0.
Console: colour dummy device 80x30t for Nand Flash Main Menu
      
console [ttySAC0               
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronicst61x251: V4L2 driver for ET61X[12]51 PC Camera Controller
DMA channel 0 at c4808000, irq 33xx-i2sram
s3c
[l
[r] Reboot u-bo
DMA channel 1 at c4808040, irq 34interface driver et61x251uoad YA

DMA channel 2 at c4808080, irq 35oot u-b
pwc: Philips webcam modul
DMA channel 3 at c48080c0, irq 36 Boot for Nand Flash Main Menu  #
S3C244X: Clock Support, DVS offCA645/646, PCVC675/680/690, PCV
bio: create slab <bio-0> at 0### Main Menu  #####hScreen s
SCSI subsystem initializedownload u-boot or ST
C830/
usbcore: registered new interface driver usbfs0, various Logitech Quickcams, Samsung MPC-C10
usbcore: registered new interface driver hubo Nand Flashdriversectronicsnload

and MPC-C
usbcore: registered new device driver usb & Pro Ex, SOTEC Afina Eye and Visionite
s3c2440-i2c s3c2440-i2c: slave address 0x10oad CRAMFS image to Nand Flashin) to Nand F
s3c2440-i2c s3c2440-i2c: bus frequenc                                   
TCP established hash table entries: 2048 (order: 2, 16384 bytes)ad User Program (eg
[b] Download LOGO Pict
conex: registered  Fl
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)omsCD Parametersnd  Flashmera Driveram
[n] Enter
etoms:
TCP: Hash tables configured (established 2048 bind 2048)rface driver finepixdownloa
[t] Test Linux Image (zImage
TCP reno registered: registeredq] quit
NET: Registered protocol family 1ew interface driver marsion 2.6


yaffs Jul 12 2010 16:33:34 Installing.rs: registeredelection:Q24
4-Z
usbcore

msgmni has been set to 116driver mr9731SB download m
alg: No test for               
[l] Se
[t] Test L
dm9000 Ethernet Driver, V1.315: registereddownl
[q] quit f
Now use the default MAC address: 10:23:45:67:89:ab6tA645/646, PCVC67

#####    Boot for Nand Flash

eth0 (dm9000): not using net_device_ops yetre: registered new interface driver spca508
eth0: dm9000e at c4814000,c4818004 IRQ 51 MAC: 10:23:45:67:89:ab (EmbedSky)load u-boot
usbcore: registered new interface driver spca561 download mode
S3C24XX NAND Driver, (c) 2004 Simtec Electronicsered
[2] Download Eboot
usbcore: registered new
s3c2440-nand s3c2440-nand: Tacls=2, 20ns Twrph0=3 30ns, Twrph1=2 20nsq905: registeredo Nand Flash2] Do
usbcore: registered new interface d
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bitbin) to N
[6] D
usbcore: registered new interface driver sunplus:23:45
[5] Downl
)d
NAND_ECC_NONE selected by board driver. This is not recom TQ2440_Te
                                            
[1]
konicawc: v1
Initializing USB Mass Storage driver...Eboot (eboot.nb0)
usbcore: registered
usbcore: registered new interface driver usb-storageux Kernel (zImage.bin) to
usbcore: registered new in
USB Mass Storage support registered.SDRAM and Run itMFS image to
quickc
usbcore: registered new interface driver usbserialoot the systemge (root.bin) to Na
[9] Format the N
usbserial: USB Serial Driver coreterface driver QCMparameters(uCOS
USB Serial support registered for pl2303gistered new interface driver s2255)ad P
usbcore: registered new interface driver pl2303e: registered new interface driver uvcvideo  Fl
pl2303: Prolific PL2303 USB to serial adaptor drivereo Class driver (v0.1.0) Download User Pro
[n] Enter
s3c2410_udc: debugfs dir creation failed -19lectronics d
[r] Reboot u-bootUs
[b] Downloa
s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FI timer quit from menu
[l] Set LCD Par
   TCP cubic regi
SE401 usb camera driver version 0.24 registeringansport module.r TFTP download mode menubin) to
usbcore: registered new interface driver se401parameters
[
[t] Test Linux Ima
lib80211: com
usbcore: registered new interface driver stv680dm9000):
usbco
Enter your selectio
s3c2410-rtc
stv680 [usb_stv680_init:1550]lock to 2010-07-16 16:59:20 U
STV(i): usb camera driver version v0.25 registering<6>stv680: v0.25:STV0680 USBe     ####
9560)

##
yaffs: dev is 32505858 name is "mtdblock2"ownload u-boot
Camera Driver or other boo
w9968cf: V4L driver for W996[87]CF JPEG USB Dual Mode Camera Chip 1:1.34-basic.2, "mtdblock2"Download Eboot (eboot.nb0) to Nand Flashr other
yaffs_read_sup
usbcore: registered new interface driver w9968cfzImag
VFS: Mounted root (yaffs filesystem) on de
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and............................................................Download Linux Kerne
VCS-UM100.n) to Nand
usbcore: registered new interface driver Philips webcam.......................................................
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10the
S3
[5] D
........................ done, booting the kernel.Program (uC
usbcore: registered new interface driver zc0301rsion 2.6.30.4-Zhousq (root@Zhou) (gcc version
gspca: main v2.5.0 registeredmogram (uCOS-II or T
[9] Form
usbcore: registered new interface driver conex09q1-176) ) #2 Thu Jul 15 15:16:52 CST 2010] B
conex: registeredUser Program (eg:
usbcore: registered new interface driver etomsv4T), cr=c00071boot parametersa
              
etoms: regi         
mars: registeredolicy: ECC disab
usbcore: registered new interface driver mr97310a from menu Reboot u-boot
CPU S3C2440A (id 0x32440
mr97310a: registered)

#####   
S3C24XX
usbcore: registered new interface driver ov519
Enter your selection:oot
####
S3C244X: core
ov519: registeredy 100.000 MHz, pe
usbcore: registered new interface driver ov534nload u-boot or STEPLDR.nb1 or other boo
CLOCK
ov534: registered MHz), fast, MPLL
usbcore: registered new interface driver pac207
[2] Download Eb
Built 1 zonelists in Zone orde
pac207: registeredg on.  Total pages
usbcore: registered new interface driver pac7311and Flasho Nand Flashr other boo
Kernel command
pac7311: registered/dev/mtdblock2 init
usbcore: registered new interface driver sonixbEboot
                                         
[0
sq905: registeredount-cache hash t
usbcore: registered new interface driver sq905cd Fl
CPU: Testing write buffer coherency: ok00e
sq905c: registeredinux Kernel (zIma

usbcore: registered new interface driver sunplusNET: Registered protocol family 16ad CRAMFS imag
sunplus: registered
S3C2440: Initialis
usbcore: registered new interface driver stk014in
S3C2440: IRQ Supportd Linux Kernel (zIma
S3C
stk014: registered) 2003-2004,2006 S
usbcore: registered new interface driver t613itAMFS image to Nand Flash[1
DMA channel 0 at
t613: registered TQ24
[8] Boot t
usbcore: registered new interface driver tv8532 34ashb/zd1211rw.ko': invalid m
[0]
DMA channe
tv8532: registeredq 35r T
[9] Format
usbcore: registered new interface driver vc032xrq 36est) parametersnload ARMv4 ' sho

S3C244X:
vc032x: registered offwnload LOGO Pi
usbcore: registered new interface driver zc3xx Set the boot parametersM

[
SCSI subsystem i
USB Video Class driver (v0.1.0)configured (established 2048 bi
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics2440_Test) t
TCP reno registeredstemSpac
[b] Downlo
s3c2410-wdt s3c2410-wdt: starting watchdog timerBoot t
[0] Set the
yaffs Jul 12 2010 16:33:34 In
s3c2410-wdt s3c2410-wdt: watchdog active, reset abled, irq enabled to 116usbcore: registere
[a] Do

alg: No test for stdrng (krng)lo
mapped channel 0 to 0 (zIma
io scheduler n
s3c2440-sdi s3c2440-sdi: powered down.LO
[l] Set LCD
ALSA device list:
  #0: S3C24XX_UDA134X (UDA134X)
TCP cubic registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lib80211: common routines for IEEE802.11 drivers
s3c2410-rtc s3c2410-rtc: setting system clock to 2010-07-16 17:09:22 UTC (127930
0162)
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 488K
Warning: unable to open an initial console.
Try to bring eth0 interface up ...
ifconfig eth0 hw ether 10:23:45:67:89:ab
eth0: link down
ifconfig eth0 192.168.1.6 netmask 255.255.255.0 up
add default gw 192.168.1.2
Done
Start Qtopia-2.2.0           
Please press Enter to activate this console.

用SecuCRT软件获取串口打印信息后贴出来吧。

##### EmbedSky BIOS for SKY2440/TQ2440 #####
Press Space key to Download Mode !
Booting Linux ...
Copy linux kernel from 0x00200000 to 0x30008000, size = 0x00300000 ... Copy Kernel to SDRAM

done,NOW, Booting Linux......
Uncompressing

Linux......................................................................................

............................................................................... done,

booting the kernel.
Linux version 2.6.30.4-Zhousq (root@Zhou) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-176)

) #2 Thu Jul 15 15:16:52 CST 2010
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
CPU: VIVT data cache, VIVT instruction cache
Machine: TQ2440
ATAG_INITRD is deprecated; please update your bootloader.
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySAC0
NR_IRQS:85
irq: clearing pending ext status 00080000
irq: clearing subpending status 00000002
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 59500KB available (4428K code, 450K data, 488K init, 0K highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 199.47 BogoMIPS (lpj=498688)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 296 bytes
NET: Registered protocol family 16
S3C2440: Initialising architecture
S3C2440: IRQ Support
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
DMA channel 0 at c4808000, irq 33
DMA channel 1 at c4808040, irq 34
DMA channel 2 at c4808080, irq 35
DMA channel 3 at c48080c0, irq 36
S3C244X: Clock Support, DVS off
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 97 KHz
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
yaffs Jul 12 2010 16:33:34 Installing.
msgmni has been set to 116
alg: No test for stdrng (krng)
io scheduler noop registered (default)

Console: switching to colour frame buffer device 100x30
fb0: s3c2410fb frame buffer device
backlight initialized
GPIO-Control initialized
PWM-Test initialized
adc initialized
s3c2440-uart.0: tq2440_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: tq2440_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: tq2440_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
loop: module loaded
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
dm9000 Ethernet Driver, V1.31
Now use the default MAC address: 10:23:45:67:89:ab
eth0 (dm9000): not using net_device_ops yet
eth0: dm9000e at c4814000,c4818004 IRQ 51 MAC: 10:23:45:67:89:ab (EmbedSky)
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nand s3c2440-nand: Tacls=2, 20ns Twrph0=3 30ns, Twrph1=2 20ns
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit)
NAND_ECC_NONE selected by board driver. This is not recommended !!
Scanning device for bad blocks
Creating 3 MTD partitions on "NAND 64MiB 3,3V 8-bit":
0x000000000000-0x000000040000 : "EmbedSky_Board_uboot"
0x000000200000-0x000000500000 : "EmbedSky_Board_kernel"
0x000000500000-0x000004000000 : "EmbedSky_Board_yaffs2"
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
s3c2410_udc: debugfs dir creation failed -19
s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes
mice: PS/2 mouse device common for all mice
TQ2440 TouchScreen successfully loaded
input: TQ2440 TouchScreen as /devices/virtual/input/input0
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
Linux video capture interface: v2.00
cx231xx v4l2 driver loaded.
usbcore: registered new interface driver cx231xx
usbcore: registered new interface driver usbvision
USBVision USB Video Device Driver for Linux : 0.9.10
usbcore: registered new interface driver ov511
ov511: v1.64 for Linux 2.5:ov511 USB Camera Driver
SE401 usb camera driver version 0.24 registering
usbcore: registered new interface driver se401
usbcore: registered new interface driver stv680
stv680 [usb_stv680_init:1550]
STV(i): usb camera driver version v0.25 registering<6>stv680: v0.25:STV0680 USB Camera

Driver
w9968cf: V4L driver for W996[87]CF JPEG USB Dual Mode Camera Chip 1:1.34-basic
usbcore: registered new interface driver w9968cf
usbcore: registered new interface driver zr364xx
zr364xx: Zoran 364xx
usbcore: registered new interface driver stkwebcam
sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49
usbcore: registered new interface driver sn9c102
et61x251: V4L2 driver for ET61X[12]51 PC Camera Controllers v1:1.09
usbcore: registered new interface driver et61x251
pwc: Philips webcam module version 10.0.13 loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-

C30,
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
usbcore: registered new interface driver Philips webcam
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10
usbcore: registered new interface driver zc0301
gspca: main v2.5.0 registered
usbcore: registered new interface driver conex
conex: registered
usbcore: registered new interface driver etoms
etoms: registered
usbcore: registered new interface driver finepix
finepix: registered
usbcore: registered new interface driver mars
mars: registered
usbcore: registered new interface driver mr97310a
mr97310a: registered
usbcore: registered new interface driver ov519
ov519: registered
usbcore: registered new interface driver ov534
ov534: registered
usbcore: registered new interface driver pac207
pac207: registered
usbcore: registered new interface driver pac7311
pac7311: registered
usbcore: registered new interface driver sonixb
sonixb: registered
usbcore: registered new interface driver sonixj
sonixj: registered
usbcore: registered new interface driver spca500
spca500: registered
usbcore: registered new interface driver spca501
spca501: registered
usbcore: registered new interface driver spca505
spca505: registered
usbcore: registered new interface driver spca506
spca506: registered
usbcore: registered new interface driver spca508
spca508: registered
usbcore: registered new interface driver spca561
spca561: registered
usbcore: registered new interface driver sq905
sq905: registered
usbcore: registered new interface driver sq905c
sq905c: registered
usbcore: registered new interface driver sunplus
sunplus: registered
usbcore: registered new interface driver stk014
stk014: registered
usbcore: registered new interface driver t613
t613: registered
usbcore: registered new interface driver tv8532
tv8532: registered
usbcore: registered new interface driver vc032x
vc032x: registered
usbcore: registered new interface driver zc3xx
zc3xx: registered
usbcore: registered new interface driver ALi m5602
ALi m5602: registered
usbcore: registered new interface driver STV06xx
STV06xx: registered
usbcore: registered new interface driver ibmcam
usbcore: registered new interface driver ultracam
konicawc: v1.4:Konica Webcam driver
usbcore: registered new interface driver konicawc
usbcore: registered new interface driver vicam
quickcam_messenger: v0.01:Logitech Quickcam Messenger USB
usbcore: registered new interface driver QCM
usbcore: registered new interface driver s2255
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: starting watchdog timer
s3c2410-wdt s3c2410-wdt: watchdog active, reset abled, irq enabled
mapped channel 0 to 0
s3c2440-sdi s3c2440-sdi: powered down.
s3c2440-sdi s3c2440-sdi: initialisation done.
s3c2440-sdi s3c2440-sdi: powered down.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18a.
No device for DAI UDA134X
No device for DAI s3c24xx-i2s
S3C24XX_UDA134X SoC Audio driver
UDA134X SoC Audio Codec
asoc: UDA134X <-> s3c24xx-i2s mapping ok
ALSA device list:
  #0: S3C24XX_UDA134X (UDA134X)
TCP cubic registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lib80211: common routines for IEEE802.11 drivers
s3c2410-rtc s3c2410-rtc: setting system clock to 2010-07-19 09:57:49 UTC (1279533469)
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 488K
Warning: unable to open an initial console.
Try to bring eth0 interface up ...
ifconfig eth0 hw ether 10:23:45:67:89:ab
eth0: link down
ifconfig eth0 192.168.1.6 netmask 255.255.255.0 up
add default gw 192.168.1.2
Done
Start Qtopia-2.2.0

Please press Enter to activate this console.

已经把用SecuCRT软件获取串口打印信息贴出来了，有劳管理员帮忙看一下，先谢过了

用《QT程序开发手册——V2.2_20100606》版本提供的qtopia可执行文件时，找不到触摸屏驱动程序，在该手手册2.3.1节，即第17页看到：“在天嵌科技提供的linux-2.6.30.4的内核中VGA开头的配置单均是没有添加对触摸的配置，它们编译出来的镜像不能使用触摸的。”是不是天嵌提供的源码编译的内核镜像不支持触摸吗？
在这个不能成功时，我选用上一个版本《QT程序开发手册——第二版200091216》提供的qtopia可执行文件，这次可以找到触摸程序，可以进行触摸校正并进入qt界面，请管理员解释一下，并且能帮我看一下上面贴出的打印信息的错误所在，谢谢了

是的VGA的配置单都是取消了触摸选项的，因为VGA上是不使用触摸的。

你给出来的串口信息中没有看到什么错误信息啊。