请教一下开发板启动过Looking up port of RPC 100003/2 on IP

usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18a.
No device for DAI UDA134X
No device for DAI s3c24xx-i2s
S3C24XX_UDA134X SoC Audio driver
UDA134X SoC Audio Codec
asoc: UDA134X <-> s3c24xx-i2s mapping ok
ALSA device list:
  #0: S3C24XX_UDA134X (UDA134X)
TCP cubic registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lib80211: common routines for IEEE802.11 drivers
s3c2410-rtc s3c2410-rtc: setting system clock to 2009-01-15 11:37:01 UTC (1232019421)
eth0: link down
IP-Config: Complete:
     device=eth0, addr=192.168.1.6, mask=255.255.255.0, gw=192.168.1.6,
     host=SKY2440, domain=, nis-domain=embedsky.net,
     bootserver=192.168.1.58, rootserver=192.168.1.58, rootpath=
Looking up port of RPC 100003/2 on 192.168.1.58

1、这是从NFS启动。
2、你没有连接网线从开发板到PC。
3、PC端有没有启动NFS服务器？