请教下述问题是文件系统哪里出问题了？YAFFS2文件系统

ppdev: user-space parallel port driver
s3c2440-uart.0: s3c2440_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: s3c2440_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: s3c2440_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
Driver 'sd' needs updating - please use bus_type methods
dm9000 Ethernet Driver, V1.31
Now use the default MAC address:10:23:45:67:89:ab
eth0 (dm9000): not using net_device_ops yet
eth0: dm9000e at c486e000,c4872004 IRQ 51 MAC: 10:23:45:67:89:ab (TQ2440)
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nand s3c2440-nand: Tacls=2, 20ns Twrph0=3 30ns, Twrph1=2 20ns
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 41 at 0x000000520000
Bad eraseblock 42 at 0x000000540000
Bad eraseblock 43 at 0x000000560000
Bad eraseblock 44 at 0x000000580000
Bad eraseblock 45 at 0x0000005a0000
Bad eraseblock 46 at 0x0000005c0000
Bad eraseblock 47 at 0x0000005e0000
Bad eraseblock 48 at 0x000000600000
Bad eraseblock 49 at 0x000000620000
Bad eraseblock 50 at 0x000000640000
Bad eraseblock 51 at 0x000000660000
Bad eraseblock 52 at 0x000000680000
Bad eraseblock 53 at 0x0000006a0000
Bad eraseblock 54 at 0x0000006c0000
Bad eraseblock 55 at 0x0000006e0000
Bad eraseblock 56 at 0x000000700000
Bad eraseblock 57 at 0x000000720000
Bad eraseblock 58 at 0x000000740000
Bad eraseblock 59 at 0x000000760000
Bad eraseblock 60 at 0x000000780000
Bad eraseblock 61 at 0x0000007a0000
Bad eraseblock 62 at 0x0000007c0000
Bad eraseblock 63 at 0x0000007e0000
Bad eraseblock 64 at 0x000000800000
Bad eraseblock 65 at 0x000000820000
Bad eraseblock 66 at 0x000000840000
Bad eraseblock 67 at 0x000000860000
Bad eraseblock 68 at 0x000000880000
Bad eraseblock 69 at 0x0000008a0000
Bad eraseblock 70 at 0x0000008c0000
Bad eraseblock 71 at 0x0000008e0000
Bad eraseblock 72 at 0x000000900000
Bad eraseblock 73 at 0x000000920000
Bad eraseblock 74 at 0x000000940000
Bad eraseblock 75 at 0x000000960000
Bad eraseblock 76 at 0x000000980000
Bad eraseblock 77 at 0x0000009a0000
Bad eraseblock 78 at 0x0000009c0000
Bad eraseblock 79 at 0x0000009e0000
Bad eraseblock 80 at 0x000000a00000
Bad eraseblock 81 at 0x000000a20000
Bad eraseblock 82 at 0x000000a40000
Bad eraseblock 83 at 0x000000a60000
Bad eraseblock 84 at 0x000000a80000
Bad eraseblock 85 at 0x000000aa0000
Bad eraseblock 86 at 0x000000ac0000
Bad eraseblock 87 at 0x000000ae0000
Bad eraseblock 88 at 0x000000b00000
Bad eraseblock 89 at 0x000000b20000
Bad eraseblock 90 at 0x000000b40000
Bad eraseblock 91 at 0x000000b60000
Bad eraseblock 92 at 0x000000b80000
Bad eraseblock 93 at 0x000000ba0000
Bad eraseblock 94 at 0x000000bc0000
Bad eraseblock 95 at 0x000000be0000
Bad eraseblock 96 at 0x000000c00000
Bad eraseblock 97 at 0x000000c20000
Bad eraseblock 98 at 0x000000c40000
Bad eraseblock 99 at 0x000000c60000
Bad eraseblock 100 at 0x000000c80000
Bad eraseblock 101 at 0x000000ca0000
Bad eraseblock 102 at 0x000000cc0000
Bad eraseblock 103 at 0x000000ce0000
Bad eraseblock 104 at 0x000000d00000
Bad eraseblock 105 at 0x000000d20000
Bad eraseblock 106 at 0x000000d40000
Bad eraseblock 107 at 0x000000d60000
Bad eraseblock 108 at 0x000000d80000
Bad eraseblock 109 at 0x000000da0000
Bad eraseblock 110 at 0x000000dc0000
Bad eraseblock 111 at 0x000000de0000
Bad eraseblock 112 at 0x000000e00000
Bad eraseblock 113 at 0x000000e20000
Bad eraseblock 114 at 0x000000e40000
Bad eraseblock 115 at 0x000000e60000
Bad eraseblock 116 at 0x000000e80000
Bad eraseblock 117 at 0x000000ea0000
Bad eraseblock 118 at 0x000000ec0000
Bad eraseblock 119 at 0x000000ee0000
Bad eraseblock 120 at 0x000000f00000
Bad eraseblock 121 at 0x000000f20000
Bad eraseblock 122 at 0x000000f40000
Bad eraseblock 123 at 0x000000f60000
Bad eraseblock 124 at 0x000000f80000
Bad eraseblock 125 at 0x000000fa0000
Bad eraseblock 126 at 0x000000fc0000
Bad eraseblock 127 at 0x000000fe0000
Bad eraseblock 128 at 0x000001000000
Bad eraseblock 129 at 0x000001020000
Bad eraseblock 130 at 0x000001040000
Bad eraseblock 131 at 0x000001060000
Bad eraseblock 132 at 0x000001080000
Bad eraseblock 133 at 0x0000010a0000
Bad eraseblock 134 at 0x0000010c0000
Bad eraseblock 135 at 0x0000010e0000
Bad eraseblock 136 at 0x000001100000
Bad eraseblock 632 at 0x000004f00000
Bad eraseblock 812 at 0x000006580000
Bad eraseblock 937 at 0x000007520000
Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x000000000000-0x000000040000 : "TQ2440_Board_uboot"
0x000000200000-0x000000500000 : "TQ2440_Boart_kernel"
0x000000500000-0x000010000000 : "TQ2440_Boart_yaffs2"
usbmon: debugfs is not available
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
mice: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
Advanced Linux Sound Architecture Driver Version 1.0.20.
ALSA device list:
  No soundcards found.
TCP cubic registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
end_request: I/O error, dev mtdblock2, sector 256
isofs_fill_super: bread failed, dev=mtdblock2, iso_blknum=64, block=128
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs2
block 2 is bad
block 3 is bad
block 4 is bad
block 5 is bad
block 6 is bad
block 7 is bad
block 8 is bad
block 9 is bad
block 10 is bad
block 11 is bad
block 12 is bad
block 13 is bad
block 14 is bad
block 15 is bad
block 16 is bad
block 17 is bad
block 18 is bad
block 19 is bad
block 20 is bad
block 21 is bad
block 22 is bad
block 23 is bad
block 24 is bad
block 25 is bad
block 26 is bad
block 27 is bad
block 28 is bad
block 29 is bad
block 30 is bad
block 31 is bad
block 32 is bad
block 33 is bad
block 34 is bad
block 35 is bad
block 36 is bad
block 37 is bad
block 38 is bad
block 39 is bad
block 40 is bad
block 41 is bad
block 42 is bad
block 43 is bad
block 44 is bad
block 45 is bad
block 46 is bad
block 47 is bad
block 48 is bad
block 49 is bad
block 50 is bad
block 51 is bad
block 52 is bad
block 53 is bad
block 54 is bad
block 55 is bad
block 56 is bad
block 57 is bad
block 58 is bad
block 59 is bad
block 60 is bad
block 61 is bad
block 62 is bad
block 63 is bad
block 64 is bad
block 65 is bad
block 66 is bad
block 67 is bad
block 68 is bad
block 69 is bad
block 70 is bad
block 71 is bad
block 72 is bad
block 73 is bad
block 74 is bad
block 75 is bad
block 76 is bad
block 77 is bad
block 78 is bad
block 79 is bad
block 80 is bad
block 81 is bad
block 82 is bad
block 83 is bad
block 84 is bad
block 85 is bad
block 86 is bad
block 87 is bad
block 88 is bad
block 89 is bad
block 90 is bad
block 91 is bad
block 92 is bad
block 93 is bad
block 94 is bad
block 95 is bad
block 96 is bad
block 97 is bad
block 593 is bad
block 773 is bad
block 898 is bad
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 104K
Kernel panic - not syncing: Attempted to kill init!
[<c0029124>] (unwind_backtrace+0x0/0xe0) from [<c02dbfe4>] (panic+0x44/0x110)
[<c02dbfe4>] (panic+0x44/0x110) from [<c0046e14>] (do_exit+0x5f4/0x620)
[<c0046e14>] (do_exit+0x5f4/0x620) from [<c00470c0>] (do_group_exit+0x3c/0xbc)
[<c00470c0>] (do_group_exit+0x3c/0xbc) from [<c0047150>] (sys_exit_group+0x10/0x18)
[<c0047150>] (sys_exit_group+0x10/0x18) from [<c0022e00>] (ret_fast_syscall+0x0/0x2c)


出错代码。。不能进入系统。

I donot konk

你制作的yaffs文件系统所针对的Nand类型和你的实际Nand Flash类型不相同引起的假坏块，而导致的错误。

具体怎么解决啊，楼上的同志！

修改的kernel配置啊！makemenuconfig去找NAND相关的选项啊！
或者找到天嵌提供的相对应的配置！

正如5楼所说。

哦，我也遇到了这个问题，马上去解决。