|
亚瑟王 发表于 2013-3-6 10:52
亲,你搞错了哦。你的看看你的信息,bootloader=后面说的镜像名称错了。是不是你修改了EmbedSky.ini文件的 ...
我将EmbedSky.ini中的operating condition改写成run,然后将OS Type改写成Others,不知道这样是不是只烧写u-boot,结果串口显示
OK
##### EmbedSky BIOS for SKY210/TQ210 #####
This Board: SDRAM is 1024MB; LCD display size is: 800X480
Hit any key to stop autoboot: 0
SD and FAT initialize success!
file length is 0x33c.
condition=RUN
u-boot will run OS!
Start Linux ......
NAND read: device 0 offset 0x500000, size 0x500000
5242880 bytes read: OK
Boot with zImage
Starting kernel ...
之后显示屏一直是花屏,然后nand打开显示黑屏,此外当我将sd卡设成自动烧写时,最后一个文件总是烧写不了,EmbedSky.ini如下#### This is TQ210 SD config files ####
operating condition=install
OS Type=Android
LED indicator=on
Beep=on
#### Others ####
bootloader=images\u-boot_TQ210_V1.1.bin
LOGO=images\logo_800x480.bin
#### Others end ####
#### Linux ####
kernel=images\zImage_2.6.35.7_for_linux_V1.1.bin
rootfs=images\rootfs_linux_V1.1.bin
#### Linux end ####
#### Windows CE ####
stepldr=images\wince\MLC\stepldr.bin
eboot=images\wince\EBOOT.bin
NK=images\wince\NK.bin
#### Windows CE end ####
#### Android ####
kernel=images\zImage_2.6.35.7_for_android_V1.1.bin
rootfs=images\rootfs_android_2.3_V1.1.bin
#### Android end ####
#### uCOS-II ####
uCOS-II Image=images\uCOS-II\TQ6410_UCOS-II.bin
#### uCOS-II end ####
#### User Application ####
Application Image=images\UserAPPS\TQ6410_Test.bin
#### User Application e
串口显示为:
OK
##### EmbedSky BIOS for SKY210/TQ210 #####
This Board: SDRAM is 1024MB; LCD display size is: 800X480
Hit any key to stop autoboot: 0
SD and FAT initialize success!
file length is 0x341.
condition=INSTALL
OSType=ANDROID
beep state=ON
bootloader=images\u-boot_TQ210_V1.1.bin
file length is 0x64000.
NAND erase: device 0 offset 0x0, size 0x100000
Erasing at 0xe0000 -- 100% complete.
OK
NAND write: device 0 offset 0x0, size 0x64000
Main area read (4 blocks):
Checksum is calculated.
Main area write (4 blocks):
524288 bytes written: OK
logodir=images\logo_800x480.bin
file length is 0x177000.
NAND erase: device 0 offset 0x200000, size 0x300000
Erasing at 0x4e0000 -- 100% complete.
OK
NAND write: device 0 offset 0x200000, size 0x177000
Writing data at 0x376800 -- 100% complete.
1536000 bytes written: OK
Android zImage=images\zImage_2.6.35.7_for_android_V1.1.bin
file length is 0x3c1b98.
NAND erase: device 0 offset 0x500000, size 0x500000
Erasing at 0x9e0000 -- 100% complete.
OK
NAND write: device 0 offset 0x500000, size 0x3c1b98
Writing data at 0x8c1800 -- 100% complete.
3939224 bytes written: OK
Android rootfs=images\rootfs_android_2.3_V1.1.bin
don't download Android rootfs
Start Linux ......
NAND read: device 0 offset 0x500000, size 0x500000
5242880 bytes read: OK
Boot with zImage
Starting kernel ...
|
|