天嵌 ARM开发社区

 找回密码
 注册
查看: 1661|回复: 4

无线网卡无法UP

[复制链接]
lyrato 发表于 2011-11-24 22:18:45 | 显示全部楼层 |阅读模式
我在研究无线网卡时,发现只要ifconfig wlan0 up系统就会自动重启
内核和文件系统都是用的光盘里天嵌做好的镜像,无线网卡也是TL-WN321G+
从iwconfig及插入的信息来看,网卡应该是认出来了,DM9000也工作正常,但无线USB网卡只要一UP就会重启,请问是什么原因。我配置过RTL8187B的驱动,与TL-WN321G+也是同样的问题,很是不解
下面是启动时的信息
======================
Please press Enter to activate this console.
[root@EmbedSky /]# usb 1-1: new full speed USB device using s3c2410-ohci and add
ress 2
usb 1-1: New USB device found, idVendor=148f, idProduct=2573
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: 54M.USB.......
usb 1-1: Manufacturer: Ralink
usb 1-1: SerialNumber: 12345
usb 1-1: configuration #1 chosen from 1 choice
phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 1300, rf: 0002, rev: 0002
573a.
=================================
iwconfig 命令
[root@EmbedSky /]# iwconfig wlan0
wlan0     IEEE 802.11bg  ESSID:""
          Mode:Managed  Frequency:2.412 GHz  Access Point: Not-Associated
          Tx-Power=0 dBm
          Retry min limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

=====================================
亚瑟王 发表于 2011-11-28 15:42:11 | 显示全部楼层
你都没有启动设备啊。
ifconfig wlan0 up
 楼主| lyrato 发表于 2011-11-28 19:49:26 | 显示全部楼层
我第一行就说了啊 ,就是"ifconfig wlan0 up"起不了,一执行这命令就重启
但是执行“ifconfig eth0 up”启动DM9000就美问题
TQ-lkp 发表于 2011-11-29 11:05:45 | 显示全部楼层
会不会是无线网卡导致供电不足引起的重启
 楼主| lyrato 发表于 2011-11-29 18:45:52 | 显示全部楼层
果然换了个电源就OK,谢谢各位
您需要登录后才可以回帖 登录 | 注册

本版积分规则

关闭

i.MX8系列ARM cortex A53 M4 工控板上一条 /1 下一条

Archiver|手机版|小黑屋|天嵌 嵌入式开发社区 ( 粤ICP备11094220号-2 )

GMT+8, 2024-7-5 05:54 , Processed in 1.046875 second(s), 18 queries .

Powered by Discuz! X3.4 Licensed

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表