|
内核启动失败,打印信息如下:
VIVI version 0.1.4 (root@localhost.localdomain) (gcc version 2.95.3 20010315 (re
lease)) #0.1.4 二 3月 31 16:43:31 CST 2009
MMU table base address = 0x33DFC000
Succeed memory mapping.
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9F1208U0B)
Found saved vivi parameters.
vga initialized ok!
Press Return to start the LINUX now, any other key for vivi
Copy linux kernel from 0x00030000 to 0x30008000, size = 0x001d0000 ... copy kern
el image from smc 0x00030000,size 0x001d0000,to 0x30008000.
done
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "noinitrd init=/linuxrc console=ttyS0 root=/dev/mtdblock/
2 mac=00:01:5d:68:7a:0f"
MACH_TYPE = 362
NOW, Booting Linux......
Uncompressing Linux.............................................................
................................ done, booting the kernel.
我修改vivi的参数为:noinitrd init=/linuxrc console=ttySAC0 root=/dev/mtdblock/
2 mac=00:01:5d:68:7a:0f"编译后从新下载vivi,但是vivi打印出的信息还是"noinitrd init=/linuxrc console=ttyS0 root=/dev/mtdblock/
2 mac=00:01:5d:68:7a:0f"
不知道是什么问题,现在内核无法启动,请高手指点,谢谢! |
|