我将程序烧写进去,走到这里不懂了-------------------------------------------------[0]: Base Address=0x80200000 Length=0x1dd0a9c
-----------------------------------------------------
+=OEMVerifyMemory+ dwStartAddr:0x80200000 dwLength:0x1dd0a9c
RAM image 0xa 0x81fd0a9b
rom_offset=0x0.
ROMHDR at Address 80200044h
+WriteOSImageToBootMedia: g_dwTocEntry =1, ImageStart: 0x80200000, ImageLength: 0x1dd0a9c, LaunchAddr:0x80201000
INFO: OEMLaunch: Found chain extenstion: '' @ 0x80200000
Writing single region/multi-region update, dwBINFSPartLength: 31263388
CreatePartition: Enter CreatePartition for 0x21.
LastLogSector: Last log sector is: 0x7ecff.
CreatePartition: Start = 0x1100, Num = 0xef00.
WriteMBR: MBR block = 0x10.
WriteData: Start = 0x0, Length = 0x1dd0a9c.
Updateded TOC!
CreatePartition: Enter CreatePartition for 0xb.
FindFreeSector: FreeSector is: 0x10000 after processing part 0x21.
CreatePartition: Num sectors set to 0x6e800 to allow for compaction blocks.
CreatePartition: Start = 0x10000, Num = 0x6e800.
WriteMBR: MBR block = 0x10.
TOC {
dwSignature: 0x434F544E
BootCfg {
ConfigFlags: 0x2830
BootDelay: 0x1
ImageIndex: 1
IP: 192.168.1.6
MAC Address: 10:23:45:67:89:AB
Port: 0.0.0.0
SubnetMask: 255.255.255.0
}
ID[0] {
dwVersion: 0x60000
dwSignature: 0x45424F54
String: 'eboot.nb0'
dwImageType: 0x2
dwTtlSectors: 0x400
dwLoadAddress: 0x80038000
dwJumpAddress: 0x80038000
dwStoreOffset: 0x0
sgList[0].dwSector: 0x400
sgList[0].dwLength: 0x400
}
ID[1] {
dwVersion: 0x1
dwSignature: 0x43465348
String: ''
dwImageType: 0x2
dwTtlSectors: 0xEE86
dwLoadAddress: 0x80200000
dwJumpAddress: 0x80201000
dwStoreOffset: 0x0
sgList[0].dwSector: 0x2100
sgList[0].dwLength: 0xEE86
}
chainInfo.dwLoadAddress: 0X00000000
chainInfo.dwFlashAddress: 0X00000000
chainInfo.dwLength: 0X00000000
}
waitforconnect
INFO: OEMLaunch: Jumping to Physical Address 0x30201000h (Virtual Address 0x80201000h)...
|