天嵌自带文件系统不经任何修改，不能启动！！

在天嵌资料的目录TQ2440_CD\Linux资源\Linux源码包\2.6.30.4 中的root_qt_4.5_2.6.30.4_20100601.tar.bz2 和 root_qtopia_2.2.0_2.6.30.4_20100601.tar.bz2
在虚拟机中解压后在经过mkyaffsimage_2 压缩后烧到开发板，不能正常启动。出现了如下的打印信息：

1. block 887 is bad
   
2. block 1774 is bad
   
3. block 1814 is bad
   
4. block 1912 is bad
   
5. yaffs_read_super: isCheckpointed 0
   
6. VFS: Mounted root (yaffs filesystem) on device 31:2.
   
7. Freeing init memory: 188K
   
8. Warning: unable to open an initial console.
   
9. Failed to execute /linuxrc.  Attempting defaults...
   
10. Kernel panic - not syncing: No init found.  Try passing init= option to kernel.
    
11. Backtrace:
    
12. [<c003bfd4>] (dump_backtrace+0x0/0x10c) from [<c033fb0c>] (dump_stack+0x18/0x1c)
    
13. r7:00000000 r6:c04aff80 r5:c04af940 r4:c0478248
    
14. [<c033faf4>] (dump_stack+0x0/0x1c) from [<c033fb5c>] (panic+0x4c/0x124)
    
15. [<c033fb10>] (panic+0x0/0x124) from [<c00374f0>] (init_post+0xec/0x178)
    
16. r3:00000000 r2:c3861e00 r1:c04e6000 r0:c0407f9c
    
17. [<c0037404>] (init_post+0x0/0x178) from [<c000847c>] (kernel_init+0xcc/0xf4)
    
18. r5:c001ec50 r4:c001f06c
    
19. [<c00083b0>] (kernel_init+0x0/0xf4) from [<c004cf30>] (do_exit+0x0/0x620)
    
20. r7:00000000 r6:00000000 r5:00000000 r4:00000000

复制代码

难道天嵌自带的文件系统有问题，我按照手册一步一步下来，也是这个问题。求助！

看有没有用错制作工具

遇到相同问题

你是多大的nand?用的哪个制作工具？

工具用错了，256Mnand 用 mkyaffs2image