- ##### Boot for TQ210 Main Menu #####
- ##### EmbedSky TFTP download mode #####
- [1] Download bootloader (u-boot or bootimage) to Nand Flash
- [2] Download WinCE NK image (NK.bin) to Nand Flash
- [3] Download Linux Kernel (zImage.bin) to Nand Flash
- [4] Download LOGO Picture (logo.bin) to Nand Flash
- [5] Download UBIFS image (root.ubi) to Nand Flash
- [6] Download YAFFS image (root.bin) to Nand Flash
- [7] Download Program to SDRAM and Run it
- [8] Boot the system
- [9] Format the Nand Flash
- [0] Set the boot parameters
- [a] Download User Program
- [n] Set TFTP parameters(PC IP,TQ210 IP,Mask IP,image name...)
- [p] Test network (TQ210 Ping PC's IP)
- [r] Reboot u-boot
- [t] Test Linux Image (zImage)
- [u] Download bootloader to SD Card
- [q] Return main Menu
- Enter your selection: 3
- dm9000 i/o: 0x88000000, id: 0x90000a46
- DM9000: running in 16 bit mode
- MAC: 00:40:5c:26:0a:5b
- operating at 10 FULL duplex mode
- TFTP from server 192.168.1.8; our IP address is 192.168.1.2
- Filename 'zImage.bin'.
- Load address: 0xc0008000
- Loading: #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- ###############
- done
- Bytes transferred = 4989208 (0x4c2118)
- NAND erase: device 0 offset 0x500000, size 0x500000
- Erasing at 0x9e0000 -- 100% complete.
- OK
- NAND write: device 0 offset 0x500000, size 0x4c2118
- Writing data at 0x9c2000 -- 100% complete.
- 4989208 bytes written: OK
- ##### Boot for TQ210 Main Menu #####
- ##### EmbedSky TFTP download mode #####
- [1] Download bootloader (u-boot or bootimage) to Nand Flash
- [2] Download WinCE NK image (NK.bin) to Nand Flash
- [3] Download Linux Kernel (zImage.bin) to Nand Flash
- [4] Download LOGO Picture (logo.bin) to Nand Flash
- [5] Download UBIFS image (root.ubi) to Nand Flash
- [6] Download YAFFS image (root.bin) to Nand Flash
- [7] Download Program to SDRAM and Run it
- [8] Boot the system
- [9] Format the Nand Flash
- [0] Set the boot parameters
- [a] Download User Program
- [n] Set TFTP parameters(PC IP,TQ210 IP,Mask IP,image name...)
- [p] Test network (TQ210 Ping PC's IP)
- [r] Reboot u-boot
- [t] Test Linux Image (zImage)
- [u] Download bootloader to SD Card
- [q] Return main Menu
- Enter your selection: 6
- dm9000 i/o: 0x88000000, id: 0x90000a46
- DM9000: running in 16 bit mode
- MAC: 00:40:5c:26:0a:5b
- operating at 10 FULL duplex mode
- TFTP from server 192.168.1.8; our IP address is 192.168.1.2
- Filename 'root.bin'.
- Load address: 0x40008000
- Loading: *
- ARP Retry count exceeded; starting again
复制代码
tftp下载 时好时坏是什么原因 |