|
我今天在按照教程移植Linux文件系统后出现了如下问题,求教。麻烦了。
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit
)
Scanning device for bad blocks0x00200000,to 0x30008000.
Bad eraseblock 1462 at 0x0000016d8000
done
zImage magi
Bad eraseblock 4032 at 0x000003f00000
Setup linux parameters at 0x3000010
Bad eraseblock 4095 at 0x000003ffc000linux command line is: "noinitrd cons
Creating 4 MTD partitions on "NAND 64MiB 3,3V 8-bit":
0x000000000000-0x000000020000 : "Bootloader vivi"= 362
NOW, Booting Linux......
0x000000020000-0x000000040000 : "vivi param"............................................
0x000000040000-0x000000240000 : "linux_kernel"
0x000000400000-0x000003f
CPU: VIVT data cache,
usb usb1: configuration #1 chosen from 1 choice
Machine: SMDK2440
hub 1-0:1.0: USB hub foundecated; please update your
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual writeback
usbcore: registered new interface driver usbserial
S3C24XX Clocks, (c) 2004 Simtec E
USB Serial support registered for generic
ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver/mtdblock3 mac=00:01:5d:6
USB Serial support registered for pl2303
USB
8:7a:0fupport
NR_IRQS:85
usbcore: registered new interface driver pl23030200
i
pl2303: Prolific PL2303 USB to serial adaptor driverlab <bio-0> at 0
irq: clearing subpending
mice: PS/2 mouse device common for all micefic PL2303
PID hash table entries: 256 (or
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
pl230
yaffs: dev is 32505859 name is "mtdblock3"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.3, "mtdblock3"
yaffs: block 1206 is marked bad
block 1207 is bad
yaffs: block 3776 is marked bad
block 3777 is bad
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:3.
Freeing init memory: 140K
cannot run '/etc/init.d/rcS': No such file or director
can't open /dev/ttySAC0: No such file or director
但是我有/etc/init.d/rcS文件啊?求解。 |
|