移植文件系统后，重启板子不对啊！？

我按照教程移植到了文件系统，做好了文件系统镜像，然后启动nor flash先下载了uboot，然后下载了内核2.6.304，然后下载了文件系统，可是没有出现教程中的现象（可以进入shell命令查看文件系统），而是出现了下面的提示（版主高手出来解决下，再次谢过，移植了几次了都不行）：
Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x000000000000-0x000000040000 : " EmbedSky_Board _uboot"
0x000000200000-0x000000500000 : " EmbedSky_Board _kernel"
0x000000500000-0x000010000000 : " EmbedSky_Board _yaffs2"
usbmon: debugfs is not available
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
mice: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
Advanced Linux Sound Architecture Driver Version 1.0.20.
ALSA device list:
  No soundcards found.
TCP cubic registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lib80211: common routines for IEEE802.11 drivers
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs2
block 537 is bad
block 538 is bad
block 600 is bad
block 663 is bad
block 681 is bad
block 1115 is bad
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 112K
Warning: unable to open an initial console.
Failed to execute /linuxrc.  Attempting defaults...
Kernel panic - not syncing: No init found.  Try passing init= option to kernel.
Backtrace:
[<c0028fd4>] (dump_backtrace+0x0/0x10c) from [<c02a8610>] (dump_stack+0x18/0x1c)
r7:00000000 r6:c03b7b60 r5:c03b7520 r4:c03942b8
[<c02a85f8>] (dump_stack+0x0/0x1c) from [<c02a8660>] (panic+0x4c/0x124)
[<c02a8614>] (panic+0x0/0x124) from [<c00244f0>] (init_post+0xec/0x178)
r3:00000000 r2:c3874900 r1:c03eb000 r0:c033831c
[<c0024404>] (init_post+0x0/0x178) from [<c000847c>] (kernel_init+0xcc/0xf4)
r5:c001eeac r4:c001f1f0
[<c00083b0>] (kernel_init+0x0/0xf4) from [<c0039f3c>] (do_exit+0x0/0x620)
r7:00000000 r6:00000000 r5:00000000 r4:00000000

还有我想问一下，天嵌提供的做好的文件系统只适合移植了QT的吗，可不可以不用QT直接使用啊！高手快点回答！很费解中！

我用天嵌提供的root_qtopia_2.2.20_2.6.30.4.tar.bz2做成镜像之后可以出现shell命令行，难道是我的文件系统做的不对。可我是按照天嵌的步骤一步一步来的啊！我做出来的镜像只有14M而天嵌的有50多M是什么问题啊！？？费解！为什么啊！！

2# cumtwys

QT 是在文件系统中提供一个界面化的界面操作而已。
你可以不用

3# cumtwys

老调重弹，你看看网友们的杰作：

http://bbs.embedsky.net/viewthre ... p;highlight=linuxrc

http://bbs.embedsky.net/viewthre ... p;highlight=linuxrc

http://bbs.embedsky.net/viewthre ... p;highlight=linuxrc

5# embedsky_lxt
呵呵！菜鸟没办法！谢谢啦！

6# cumtwys


遇到问题，先搜索一下，这样论坛里的topic 就比较优化，也方便您以后阅读