天嵌 ARM开发社区

 找回密码
 注册
查看: 2004|回复: 5

uboot选项里没有enter TFTP download menu

[复制链接]
54tianping 发表于 2010-10-28 12:46:06 | 显示全部楼层 |阅读模式
我的uboot里怎么没有n命令?直接就是。
#####    Boot for Nor Flash Main Menu   #####                                   
[1] Download u-boot or STEPLDR.nb1 or other bootloader to Nand Flash            
[2] Download Eboot to Nand Flash                                                
[3] Download Linux Kernel to Nand Flash                                         
[5] Download CRAMFS image to Nand Flash                                         
[6] Download YAFFS image to Nand Flash                                          
[7] Download Program (uCOS-II or TQ2440_Test) to SDRAM and Run it               
[8] Boot the system                                                            
[9] Format the Nand Flash                                                      
[0] Set the boot parameters                                                     
[a] Download User Program (eg: uCOS-II or TQ2440_Test)                          
[b] Download LOGO Picture (.bin) to Nand  Flash                                 
[l] Set LCD Parameters                                                         
[o] Download u-boot to Nor Flash                                                
[r] Reboot u-boot                                                               
[t] Test Linux Image (zImage)                                                   
[q] quit from menu                                                              
Enter your selection:
天嵌_support1 发表于 2010-10-28 12:50:40 | 显示全部楼层
1# 54tianping


烧的是哪个文件呢?文件全名贴来看看。
 楼主| 54tianping 发表于 2010-10-28 13:00:59 | 显示全部楼层
我没烧文件啊。想要烧文件,开机打开就显示上面的。但是想要设置tftp下载的ip信息到选项没有啊。。。。
machoe 发表于 2010-10-28 14:34:37 | 显示全部楼层
你的U-BOOT是老版本,要用201006版的,快去下吧,论坛上有。201006光盘。
 楼主| 54tianping 发表于 2010-10-28 15:26:02 | 显示全部楼层
谢谢楼上,海想问个问题。网在linux下怎么下载.bin文件啊?如果网想重新烧uboot是不是得先把uboot烧到nandflash里,再用nandflash启动烧些uboot到norflash啊?在linux下用什么软件或者什么命令下载?我使新手。谢谢!
天嵌_support1 发表于 2010-10-28 17:54:18 | 显示全部楼层
5# 54tianping


你那样更新uboot是对的。
不过你烧写.bin文件,uboot不是有命令行给你用么?
您需要登录后才可以回帖 登录 | 注册

本版积分规则

关闭

i.MX8系列ARM cortex A53 M4 工控板上一条 /1 下一条

Archiver|手机版|小黑屋|天嵌 嵌入式开发社区 ( 粤ICP备11094220号-2 )

GMT+8, 2024-9-12 18:01 , Processed in 1.033243 second(s), 19 queries .

Powered by Discuz! X3.4 Licensed

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表