zc0301pl移植问题求助

我没有移植GSPCA5XX配置，而是直接按照基于TQ2440和linux2.6.30.4的网络摄像机中的USB摄像头配置配置了ZC0301，但是接上USB摄像头后出现以下信息：
usb 1-1: new full speed USB device using s3c2410-ohci and address 4
uvcvideo: Found UVC 1.00 device <unnamed> (1871:0306)
input: UVC Camera (1871:0306) as /class/input/input1
UVC Camera ？？怎么设别成这个了，而不是PC Camera ？

[root@VanlOS /]# ls /dev/video0
/dev/video0
[root@VanlOS /]#
说明摄像头被识别了？初始化成功？

[root@VanlOS /]# lsusb
Bus 001 Device 001: ID 1d6b:0001
Bus 001 Device 002: ID 1871:0306
[root@VanlOS /]#

这个摄像头在linux下识别的信息如下：
# lshal|grep usb
…………
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0'  (string)
  usb.max_power = 500  (0x1f4)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 2  (0x2)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Video Interface'  (string)
  usb.product_id = 774  (0x306)  (int)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Aveo Technology Corp.'  (string)
  usb.vendor_id = 6257  (0x1871)  (int)
  usb.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1871_306_noserial_if0_video4linux'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1871_306_noserial_if0'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1871_306_noserial_if0_video4linux'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/video4linux/video0'  (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1871_306_noserial_if0_logicaldev_input'
  info.parent = '/org/ freedesktop/Hal/devices/
………………

# lshal|grep /dev/video0
  access_control.file = '/dev/video0'  (string)
  linux.device_file = '/dev/video0'  (string)
  video4linux.device = '/dev/video0'  (string)

2# vanlos


嗯..有这个节点生成是成功了