开发板的LINUX系统无法正常启动

在改完NFS根目录时的引导参数后，开发板上的linux 无法正常启动。
我用的是VMware，里面的REDHAT的ip为192.168.137.195;host操作系统是WIN7,IP为192.168.137.197;所以我设置的开发板IP为，192.168.137.196;完了之后开发板上的LINUX就无法正常启动了。如图

1# star890812


设置IP不会影响系统启动的问题。
你启动的信息呢？

2# embedsky_lxt


在下面的rar文件中。有个截图。

3# star890812

就启动到这块就不动了
TQ2440 UDA1341 audio driver initialized
NET: Registered protocol family 2
TQ2440-SD TQ2440-SD: powered down.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
enable_irq(51) unbalanced from c017c438
IP-Config: Complete:
      device=eth0, addr=192.168.137.196, mask=255.255.255.0, gw=192.168.137.196,

     host=TQ2440, domain=, nis-domain=embedsky.net,
     bootserver=192.168.137.195, rootserver=192.168.137.195, rootpath=
Looking up port of RPC 100003/2 on 192.168.137.195
portmap: server 192.168.137.195 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/1 on 192.168.137.195
portmap: server 192.168.137.195 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default

4# star890812

检测一下你的nfs 服务器。

手册上有教你怎么检测哦。(mount -t nfs IP:/路径  /到哪的路劲)
还有用之前ping 一下嘛。