移植文件系统之后发现串口多出了一些信息

##### EmbedSky BIOS for SKY2440/T                                
ATAG_INITRD is deprecated; please update your bootloader.dSky BIOS for SKY2440/TQ2440 #####sed flags ""           
Memory policy: ECC disabled, Data cache writebackMode ! "EmbedSky_Board_uboot": Linux 2.6

#####  
CPU S3C2440A (id 0x32440001)u   #####00000200000-0x00000
S3C24XX Clocks, (c) 2004 Simtec Electronicsot or STEPLDR.nb1 or other bootloader to Na
S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz   
bl
[2] Download Eboot to Nand Flash   
ohci_hcd: USB 1.1 'Open'
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL onver                           
[5] Download CRAMFS i
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256S image to Nand Flashs registered, assigned bus number 1okn
[7] Download P
Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySACi: irq 42, io mem 0x4900000ist:artial
[8] Boot the system                  
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)ux Image (zImage)ad        
usb usb1: configur
[q] quit from
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
hub 1-0
USB host is connected. Waiting a download.ac
hub 1-
Memory: 64MB = 64MB total      

Now, Downloading
Memory: 60876KB available (3444K code, 374K data, 180K init, 0K highmem)      
usb
RECEIVED FILE SIZE: 1924682 (626KB/S, 3S)storagetectededBIOS
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1000d.lock 388 detecteded                 
usbcore: reg
Erasing at 0x3e0
[2] Downl
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics] Download Linux Kernel to Nand Flashy wr
mice: PS/2 mous
DMA channel 0 at c4808000, irq 33RAMFS image to Nand Flash        
DMA channel 1 at c4808040, irq 34] Download YAFFS image to Nand Fl
DMA channel 2 at c4808080, irq 35Screen
[7] Download Program (uCO
DMA channel 3 at c48080c0, irq 36Run it4X)X: core 400.000      
S3
S3C244X: Clock Support, DVS offElectr
[8] Boot the system     
bio: create slab <bio-0> at 0Nand Flashc2410-rtc: rtc disa
SCSI subsystem i               
Uncompressing Linux..........
TCP: Hash tables configured (established 2048 bind 2048)      
s3c2440-sdi s3c2440-sdi: powered down.        

P
TCP reno registered...................
NET: Registered protocol family 1....... done, booting the        
yaffs Oct 30 2009 21:01:24 Installing.owered down.           BB0      
kerne
msgmni has been set to 119.30.4-EmbedSky (root@Embed
alg: No test for stdrng (krng)ry G++-/bin/sh: wetH: n
usbhid
io scheduler noop registered (default)CCC              
Lite 2009q1-203) )
Console: switching to colour frame buffer device 40x15                     
*** War
CPU: ARM920T [41129200]
fb0: s3c2410fb frame buffer device   
No device for DAI s3c24xx-i2s
backlight initializedU: VIVT data cache, V
GPIO-Control initialized                        
PWM-Test initializedine: TQ2440ownload M
adc initializedRD is deprecate
s3c2440-uart.0: tq2440_serial0 at MMIO 0x
            
ALSA device l           
yaffs_read_super: isCh
t)po
Scanning device for bad blocks3.3 (: 3,
VFS: Mounted
Dentr
Bad eraseblock 12 at 0x000000180000der: 3, 32768 bytes)r bootloader.  
Bad eraseblock 449 at 0x00000382000080K      
Inode-cache hash table ent
Bad eraseblock 735 at 0x000005be0000mented, Data cache writeback        
Bad eraseblock 1664 at 0x00000d0000004MB totalace driver rt73usb0001)  
Me
Bad eraseblock 1665 at 0x00000d02000074K data, 180K init, 0K highmem)ce dr
Bad eraseblock 1727 at 0x00000d7e0000a S3C24                 
init
SLUB: G
Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":, Nodes=1400.000 MH
s3c2440 camif init doneeripheral 5
0x000000000000-0x000000040000 : "EmbedSky_Board_uboot"9.47 BogoMIPS (lpj=498688)address 0x60, manufacture ID
0x000000200000-0x000000400000 : "EmbedSky_Board_kernel"s: 512K: Slow mode (1.5
OV9650 address 0x
CPU: Testing
s3c2440
hub 1-0:1.0: USB hub foundency set to 97 KHz     
Bo
hub 1-0:1.0: 2 ports detected;34mvar0m     
s3c2440-i2c s3
Initializing USB Mass Storage driver...    1;34mmnt0m         1;34mroot0m     
usbcore: registered new interface driver usb-storageomainnux kernel from 0x00200000 to
mtmp0m         1;
USB Mass Storage support registered.mily 2m         1;36mlinuxrc0m     1
usbcore: registered new interface driver usbserial 0, 4096 bytes)                           
S3C2440
usbserial: USB Serial Driver coretablished hash table entries: 204
USB Serial support registered for pl2303       1;34mlost+found0m  1;34mproc0m   
usbcore: registered new interface driver pl2303r: 1, 8192 bytes)                     
S
msys0
pl2303: Prolific PL2303 USB to serial adaptor driverd (established 2048 bind 2048) 1;34mmnt0m         1;
s3c2410_udc: debugfs dir creation failed -19egistered 34               
NET: Registered
GPIO-Control initialized      
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling/TQ2440
adc initialized               
s3c2440-uar
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc02440lling CRDA to

#####    Boot for Nor Flash Main Menu
i2c /dev entries driver2440-uart.1: tq2440_ser
Linux video capture interface: v2.00 a S3C2440her bootloader to Nand Fla
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10al2 at MMIO 0x50008000 (irq = 76)                           
            
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronicsbind 2048) v2.0
[a] Download User Program (eg: uCOS
s3c2410-wdt s3c2410-wdt: starting watchdog timerics                 
TCP
[b] Download LOGO Pictu
s3c2410-wdt s3c2410-wdt: watchdog active, reset abled, irq enabled2 20nsl] Set LCD Parameters  
yaffs Nov 14 2010 0
[o] Download u-b
mapped channel 0 to 0 Manufacturer ID: 0xe
s3c2440-sdi s3c2440-sdi: powered down.,3V 8-bist Linux Image (zImage)      
s3c2440-sdi s3c2440-sdi: initialisation done.st f
t)st
Scanning device for bad blocks     

NA
Creating 3 MTD part
S3C24XX_UDA134X SoC Audio driver":: switching to co            
UDA134X SoC Audio Codec
0x000000000000-0x00000
asoc: UDA134X <-> s3c24xx-i2s mapping ok 222988 bytes written: OK   
adc initial
ALSA device list:00-0x000000400000
  #0: S3C24XX_UDA134X (UDA134X)                              
TCP cubic registered000000400000-0x00000
RPC: Registered udp transport module. bad blocks                          
RPC: Registered tcp transport module. Host Controller (OHCI) DriverNAND 25
lib80211: common routines for IEEE802.11 to Na
                                
[9

yaffs: auto selecting yaffs2d, idVendor=1d6b, idProduct=
block 418 is bads      
Bad era
block 704 is badDownload User P

block 1633 is baddevice strings: M
block 1634 is baderialNumber=1   
block 1696 is bad
[b] Download LOG
No OV9650 found!!!
Try to bring eth0 interface up ...
ifconfig eth0 hw ether 10:23:45:67:89:ab
eth0: link down
ifconfig eth0 192.168.1.6 netmask 255.255.255.0 up
add default gw 192.168.1.2
Done
[01/Jan/1970:00:00:06 +0000] Start Qtopia-2.2.0
boa: server version Boa/0.94.13
[01/Jan/1970:00:00:06 +0000] boa: server built Jul 29 2009 at 14:27:34.
[01/Jan/1970:00:00:06 +0000] boa: starting server pid=478, port 80

Please press Enter to activate this console. 9;0]?33l?25l
[root@EmbedSky /]# ls
1;34mbin0m         1;34mhome0m        1;34mlost+found0m  1;34mproc0m        1;34
msys0m         1;34mvar0m
1;34mdev0m         1;34mlib0m         1;34mmnt0m         1;34mroot0m        1;34
mtmp0m         1;34mweb0m
1;34metc0m         1;36mlinuxrc0m     1;34mopt0m         1;34msbin0m        1;34
musr0m
[root@EmbedSky /]# cd /opt/J
[root@EmbedSky /opt]# ls
1;34mQtopia0m  1;34mkde0m
[root@EmbedSky /opt]#


现在里面烧写的u-boot_W35_20091031.bin，zImage_2.6.30.4_W35_256MB_20091030.bin和root_qtopia_2.2.0_2.6.30.4_256MB_20091216.bin都是出厂时板子自带的，可仍然是那个样子，每个文件名前后都出现了别的字符，之前用我编译出的也出现了和这一样的情况，我以为是文件系统的问题，就用板子自带的那个，而uboot和zImage都用的是自己编译出来，可结果一样；我又只把内核换成自己编译出来的，还是没解决，换成uboot也一样，索性我就全用出厂带的，这下好了，那些字符还是照样出现，但系统操却没什么问题。帮忙看看，指导下