|
我是按照手册做的,开发板和PC机网络也通了,但是打开win32-upx里的软件,连接看不到图像。
我的摄像头插在我的pc上是好的,能视频。
插入摄像头,显示如下:
[root@EmbedSky /]# gspca: disconnect complete
usb 1-1: new full speed USB device using s3c2410-ohci and address 3
usb 1-1: New USB device found, idVendor=0ac8, idProduct=301b
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: PC Camera
usb 1-1: Manufacturer: V Micro. Corp.
usb 1-1: configuration #1 chosen from 1 choice
gspca: probing 0ac8:301b
zc3xx: probe 2wr ov vga 0x0000
zc3xx: probe 3wr vga 1 0x0000
zc3xx: probe 3wr vga 2 0x0000
zc3xx: Sensor UNKNOW_0 force Tas5130
gspca: probe ok
输入命令:
[root@EmbedSky /]# mjpg_streamer -i "/lib/WebCam/input_uvc.so" -o "/lib/WebCam/o
utput_http.so -w 192.168.1.6: 8080"
MJPG-streamer [538]: starting application
MJPG Streamer Version.: 2.0
MJPG-streamer [538]: MJPG Streamer Version.: 2.0
i: Using V4L2 device.: /dev/video0
MJPG-streamer [538]: Using V4L2 device.: /dev/video0
i: Desired Resolution: 640 x 480
MJPG-streamer [538]: Desired Resolution: 640 x 480
i: Frames Per Second.: 5
MJPG-streamer [538]: Frames Per Second.: 5
i: Format............: MJPEG
MJPG-streamer [538]: Format............: MJPEG
o: www-folder-path...: 192.168.1.6:/
MJPG-streamer [538]: www-folder-path...: 192.168.1.6:/
o: HTTP TCP port.....: 8080
MJPG-streamer [538]: HTTP TCP port.....: 8080
o: username:password.: disabled
MJPG-streamer [538]: username:password.: disabled
o: commands..........: enabled
MJPG-streamer [538]: commands..........: enabled
MJPG-streamer [538]: starting input plugin
MJPG-streamer [538]: starting output plugin: /lib/WebCam/output_http.so (ID: 00)
MJPG-streamer [538]: serving client: 192.168.1.10
打开软件,看不到图像,灰的。
求高人指点! |
|