|
本帖最后由 xillin_xi 于 2011-4-26 22:15 编辑
[root@EmbedSky /]# usb 1-1: new full speed USB device using s3c2410-ohci and address 2
usb 1-1: New USB device found, idVendor=0c45, idProduct=62c0
usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-1: Product: USB 2.0 Camera
usb 1-1: Manufacturer: Sonix Technology Co., Ltd.
usb 1-1: SerialNumber: SN0001
usb 1-1: configuration #1 chosen from 1 choice
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
input: USB 2.0 Camera as /devices/platform/s3c2410-ohci/usb1/1-1/1-1:1.0/input/input1
[root@EmbedSky /]# mjpg_streamer -i "/lib/WebCam/input_uvc.so" -o "/lib/WebCam/o
utput_http.so -w 192.168.1.6: 8080"
MJPG-streamer [505]: starting application
MJPG Streamer Version.: 2.0
MJPG-streamer [505]: MJPG Streamer Version.: 2.0
i: Using V4L2 device.: /dev/video0
MJPG-streamer [505]: Using V4L2 device.: /dev/video0
i: Desired Resolution: 640 x 480
MJPG-streamer [505]: Desired Resolution: 640 x 480
i: Frames Per Second.: 5
MJPG-streamer [505]: Frames Per Second.: 5
i: Format............: MJPEG
MJPG-streamer [505]: Format............: MJPEG
o: www-folder-path...: 192.168.1.6:/
MJPG-streamer [505]: www-folder-path...: 192.168.1.6:/
o: HTTP TCP port.....: 8080
MJPG-streamer [505]: HTTP TCP port.....: 8080
o: username:password.: disabled
MJPG-streamer [505]: username:password.: disabled
o: commands..........: enabled
MJPG-streamer [505]: commands..........: enabled
MJPG-streamer [505]: starting input plugin
MJPG-streamer [505]: starting output plugin: /lib/WebCam/output_http.so (ID: 00)
这是串口信息,看起来驱动ok了,但是运行viewer.exe设置192.168.1.6 8080点connect提示:Error on connect:connection refused麻烦这个是什么造成的? |
|