|
本帖最后由 Embedded_stu 于 2019-12-11 20:08 编辑
Cannot set touchscreen to work
gx801: probe of 2-0055 failed with error 1
Goodix-ms 2-005d: Install at811 driver
Goodix-ms 2-005d: Driver Release Date: 2012-02-08
Goodix-Ts 2-005d: GT811 init info: x MAX=800, Y MAX=
480, TRIG MODE=RISING EDGE
input: Capacitance ts as /devices/virtual/input/input4
Goodix-ms 2-005d: Gr811 Verion: 0x0000
Goodix-Ts 2-005d: Create proc entry success!
Goodix-Ts 2-005d: Start Capacitance ts in interrupt mode, Driver
Modify Date: 2012-01-05
probe succeed
goodix ts probe, 918, drivers/input/touchscreen/gt811c
s3c-rtc s3c64xx-rtc: setting system clock to 2070-01-10 12: 56: 28
Urc(3156584188)
FIMco registered successfully
FIMC1 registered successfull
FIMC2 registered successfully
S5PC1XX TVOUT Driver, (c)2009 Samsung Electronics
5p-tvout s5p-tvout: hpd status is cable removed
yaffs: dev is 32505859 name is"mtdblock3"rw
yaffs: passed flags " inband-tags
FS: Mounted root (yaffs2 filesystem) on device 31: 3
Freeing init memory: 188K
Failed to execute /init. Attempting defaults
Kernel panic- not syncing: No init found. Try passing init=
ption to kernel. See Linux Documentation/init. txt for guidance
|
|