TL-MN322G+无法正常使用

usb 1-1: new full speed USB device using s3c2410-ohci and address 2
usb 1-1: New USB device found, idVendor=0cf3, idProduct=1006
usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 1-1: Product: USB2.0 WLAN
usb 1-1: Manufacturer: ATHEROS
usb 1-1: SerialNumber: 12345
usb 1-1: configuration #1 chosen from 1 choice
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 180K

usbcore: registered new interface driver rt73usb
usbcore: registered new interface driver zd1211rw
initializing s3c2440 camera interface......
s3c2440 camif init done
Loading OV9650 driver.........
OV9650 address 0x60, manufacture ID 0x7FA2, expect 0x7FA2
OV9650 address 0x60, product ID 0x9652, expect 0x9650
OV9650 init done!
Try to bring eth0 interface up ...
ifconfig: SIOCSIFADDR: No such device
ifconfig wlan0 192.168.1.6 netmask 255.255.255.0 up
route: SIOCADDRT: Network is unreachable
route add default gw 192.168.1.2
Error for wireless request "Set ESSID" (8B1A) :
    SET failed on device wlan0 ; No such device.
iwconfig wlan0 essid EmbedSky key
Done
[20/Nov/2008:12:37:14 +0000] boa: server version Boa/0.94.13
[20/Nov/2008:12:37:14 +0000] boa: server built Jul 29 2009 at 14:27:34.
[20/Nov/2008:12:37:14 +0000] boa: starting server pid=491, port 80
Start Qtopia-2.2.0
Please press Enter to activate this console. [root@EmbedSky /]#
[root@EmbedSky /]# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.
拨下USB：
[root@EmbedSky /]# usb 1-1: USB disconnect, address 2
插入USB：
usb 1-1: new full speed USB device using s3c2410-ohci and address 3
usb 1-1: New USB device found, idVendor=0cf3, idProduct=1006
usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 1-1: Product: USB2.0 WLAN
usb 1-1: Manufacturer: ATHEROS
usb 1-1: SerialNumber: 12345
usb 1-1: configuration #1 chosen from 1 choice

[root@EmbedSky /]#

你用的是322的V2.0版本的无线网卡，TQ2440标配的驱动是针对V1.0版本的。

有办法支持322吗？

目前所了解到的322G + V2.0和321G+ V1.0是使用的相同的芯片。都是雷凌的R73系列的芯片。