qtopia不能正常启动

我按数据手册移植了linux2.6.30.4,然后直接烧写你们root_qtopia_2.2.0_2.6.30.4_256MB_20091216.bin根文件系统,在启动之前不插鼠标时,系统能正常启动,qtopia的界面也可以出来,但是在启动之前插上鼠标再启动时,根据打印信息系统正常启动,根文件系统也正确挂载,命令也能正确执行,但界面就是一直停在内核启动时的界面,不能进入qtopia界面!不止到是怎么会事?

qtopia自身的问题。
解决鼠标热插拔的思路：在qtopia中做一个判断，当没有鼠标设备时，就虚拟一个鼠标的设备出来，当有了鼠标的物理设备后，就用物理设备去代替虚拟的那个设备。

串口有什么打印信息，贴出来。

不插鼠标能进入的Qtopia界面的打印信息:

   *** Warning - bad CRC or NAND, using default environment




##### EmbedSky BIOS for SKY2440/TQ2440 #####

Press Space key to Download Mode !
Booting Linux ...
Copy linux kernel from 0x00200000 to 0x30008000, size = 0x00200000 ... Copy Kernel to SDRAM done,NOW, Booting Linux......

Uncompressing Linux............................................................................................................................... done, booting the kernel.
Linux version 2.6.30.4GSK983 (root@EmbedSky) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #20 Sat May 8 15:53:17 CST 2010
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
CPU: VIVT data cache, VIVT instruction cache
Machine: SMDK2440
ATAG_INITRD is deprecated; please update your bootloader.
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySAC0
NR_IRQS:85
irq: clearing pending ext status 00080900
irq: clearing subpending status 00000002
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 60652KB available (3312K code, 379K data, 424K init, 0K highmem)
Calibrating delay loop... 199.47 BogoMIPS (lpj=498688)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 936 bytes
NET: Registered protocol family 16
S3C Power Management, Copyright 2004 Simtec Electronics
S3C2440: Initialising architecture
S3C2440: IRQ Support
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
DMA channel 0 at c4808000, irq 33
DMA channel 1 at c4808040, irq 34
DMA channel 2 at c4808080, irq 35
DMA channel 3 at c48080c0, irq 36
S3C244X: Clock Support, DVS off
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 97 KHz
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (extended precision)
JFFS2 version 2.2. (NAND) (SUMMARY)  漏 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
yaffs May  8 2010 10:54:05 Installing.
msgmni has been set to 118
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Console: switching to colour frame buffer device 80x30
fb0: s3c2410fb frame buffer device
GPIO-Control initialized
PWM-Test initialized
adc initialized
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
s3c2440-uart.0: tq2440_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: tq2440_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: tq2440_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nand s3c2440-nand: Tacls=3, 30ns Twrph0=7 70ns, Twrph1=3 30ns
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
Scanning device for bad blocks
Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x000000000000-0x000000040000 : "EmbedSky_Board_uboot"
0x000000200000-0x000000400000 : "EmbedSky_Board_kernel"
0x000000400000-0x00000ff80000 : "EmbedSky_Board_yaffs2"
usbmon: debugfs is not available
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
mice: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
s3c2410-rtc s3c2410-rtc: setting system clock to 2150-01-10 11:05:27 UTC (1386131831)
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs2
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 424K
hwclock: settimeofday() failed: Invalid argument
input_polldev: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4GSK983 mod_unload ARMv4 '
insmod: cannot insert '/lib/input-polldev.ko': invalid module format
mac80211: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4GSK983 mod_unload ARMv4 '
insmod: cannot insert '/lib/mac80211.ko': invalid module format
rt2x00lib: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4GSK983 mod_unload ARMv4 '
insmod: cannot insert '/lib/rt2x00lib.ko': invalid module format
rt2x00usb: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4GSK983 mod_unload ARMv4 '
insmod: cannot insert '/lib/rt2x00usb.ko': invalid module format
rt73usb: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4GSK983 mod_unload ARMv4 '
insmod: cannot insert '/lib/rt73usb.ko': invalid module format
zd1211rw: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4GSK983 mod_unload ARMv4 '
insmod: cannot insert '/lib/zd1211rw.ko': invalid module format
ov9650: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4GSK983 mod_unload ARMv4 '
insmod: cannot insert '/lib/ov9650.ko': invalid module format
Try to bring eth0 interface up ...
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCSIFHWADDR: No such device
ifconfig eth0 hw ether 10:23:45:67:89:ab
ifconfig: SIOCSIFADDR: No such device
ifconfig eth0 192.168.1.6 netmask 255.255.255.0 up
route: SIOCADDRT: Network is unreachable
add default gw 192.168.1.2
Done
[04/Dec/2013:04:37:21 +0000] Start Qtopia-2.2.0
boa: server version Boa/0.94.13
[04/Dec/2013:04:37:21 +0000] boa: server built Jul 29 2009 at 14:27:34.
[04/Dec/2013:04:37:21 +0000] boa: starting server pid=949, port 80

Please press Enter to activate this console.
[root@EmbedSky /]# [9;0][?33l[?25l
[root@EmbedSky /]#

插鼠标不能进入的Qtopia界面的打印信息:
*** Warning - bad CRC or NAND, using default environment


##### EmbedSky BIOS for SKY2440/TQ2440 #####

Press Space key to Download Mode !
Booting Linux ...
Copy linux kernel from 0x00200000 to 0x30008000, size = 0x00200000 ... Copy Kernel to SDRAM done,NOW, Booting Linux......

Uncompressing Linux............................................................................................................................... done, booting the kernel.
Linux version 2.6.30.4GSK983 (root@EmbedSky) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #20 Sat May 8 15:53:17 CST 2010
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
CPU: VIVT data cache, VIVT instruction cache
Machine: SMDK2440
ATAG_INITRD is deprecated; please update your bootloader.
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySAC0
NR_IRQS:85
irq: clearing pending ext status 00080900
irq: clearing subpending status 00000002
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 60652KB available (3312K code, 379K data, 424K init, 0K highmem)
Calibrating delay loop... 199.47 BogoMIPS (lpj=498688)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 936 bytes
NET: Registered protocol family 16
S3C Power Management, Copyright 2004 Simtec Electronics
S3C2440: Initialising architecture
S3C2440: IRQ Support
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
DMA channel 0 at c4808000, irq 33
DMA channel 1 at c4808040, irq 34
DMA channel 2 at c4808080, irq 35
DMA channel 3 at c48080c0, irq 36
S3C244X: Clock Support, DVS off
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 97 KHz
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (extended precision)
JFFS2 version 2.2. (NAND) (SUMMARY)  漏 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
yaffs May  8 2010 10:54:05 Installing.
msgmni has been set to 118
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Console: switching to colour frame buffer device 80x30
fb0: s3c2410fb frame buffer device
GPIO-Control initialized
PWM-Test initialized
adc initialized
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
s3c2440-uart.0: tq2440_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: tq2440_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: tq2440_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nand s3c2440-nand: Tacls=3, 30ns Twrph0=7 70ns, Twrph1=3 30ns
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
Scanning device for bad blocks
Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x000000000000-0x000000040000 : "EmbedSky_Board_uboot"
0x000000200000-0x000000400000 : "EmbedSky_Board_kernel"
0x000000400000-0x00000ff80000 : "EmbedSky_Board_yaffs2"
usbmon: debugfs is not available
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
mice: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
s3c2410-rtc s3c2410-rtc: setting system clock to 2150-01-10 11:16:52 UTC (1386132516)
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs2
usb 1-1: new low speed USB device using s3c2410-ohci and address 2
usb 1-1: configuration #1 chosen from 1 choice
input: SIGMACH1P U+P Mouse as /class/input/input0
generic-usb 0003:1C4F:0003.0001: input: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-s3c24xx-1/input0
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
Partially written block 818 detected
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 424K
hwclock: settimeofday() failed: Invalid argument
input_polldev: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4GSK983 mod_unload ARMv4 '
insmod: cannot insert '/lib/input-polldev.ko': invalid module format
mac80211: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4GSK983 mod_unload ARMv4 '
insmod: cannot insert '/lib/mac80211.ko': invalid module format
rt2x00lib: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4GSK983 mod_unload ARMv4 '
insmod: cannot insert '/lib/rt2x00lib.ko': invalid module format
rt2x00usb: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4GSK983 mod_unload ARMv4 '
insmod: cannot insert '/lib/rt2x00usb.ko': invalid module format
rt73usb: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4GSK983 mod_unload ARMv4 '
insmod: cannot insert '/lib/rt73usb.ko': invalid module format
zd1211rw: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4GSK983 mod_unload ARMv4 '
insmod: cannot insert '/lib/zd1211rw.ko': invalid module format
ov9650: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4GSK983 mod_unload ARMv4 '
insmod: cannot insert '/lib/ov9650.ko': invalid module format
Try to bring eth0 interface up ...
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCSIFHWADDR: No such device
ifconfig eth0 hw ether 10:23:45:67:89:ab
ifconfig: SIOCSIFADDR: No such device
ifconfig eth0 192.168.1.6 netmask 255.255.255.0 up
route: SIOCADDRT: Network is unreachable
add default gw 192.168.1.2
Done
[04/Dec/2013:04:48:46 +0000] Start Qtopia-2.2.0
boa: server version Boa/0.94.13
[04/Dec/2013:04:48:46 +0000] boa: server built Jul 29 2009 at 14:27:34.
[04/Dec/2013:04:48:46 +0000] boa: starting server pid=958, port 80

Please press Enter to activate this console.
[root@EmbedSky /]# [9;0][?33l[?25l

修改文件系统的/bin/qtopia文件，将qpe同行的qpe后面的内容去掉了，保存该文件，然后重启开发板看串口有什么打印信息。

/bin/qtopia文件的内容如下:
#!/bin/sh

echo Start Qtopia-2.2.0 > /dev/tq2440_serial0

export set TSLIB_TSDEVICE=/dev/event0
export set TSLIB_CONFFILE=/etc/ts.conf
export set TSLIB_PLUGINDIR=/lib/ts
export set TSLIB_CALIBFILE=/etc/pointercal
export set HOME=/root
export set QTDIR=/opt/Qtopia
export set QPEDIR=/opt/Qtopia
export set KDEDIR=/opt/kde
export set QWS_KEYBOARD="USB:/dev/event1"
export set QWS_MOUSE_PROTO="TPanel:/dev/event0 USB:/dev/mouse0"
export set PATH=$QPEDIR/bin:$PATH
export set LD_LIBRARY_PATH=$QTDIR/lib:$QPEDIR/lib
if [ -f /etc/pointercal ] ; then
        $QPEDIR/bin/qpe > /dev/null 2>/dev/null
else
        ts_calibrate
        $QPEDIR/bin/qpe > /dev/null 2>/dev/null
fi

在此文件里好象没有qpe这一行,你说的那一行难道是export set QPEDIR=/opt/Qtopia?

补充一下:
    我自己的屏不带触摸屏

$QPEDIR/bin/qpe > /dev/null 2>/dev/null
这个就是带qpe的啊。
去掉 > /dev/null 2>/dev/null信息。然后在文件系统的/etc目录下建立一个piontercal文件，避开触摸校验。

1. 插鼠标不能进入的Qtopia界面的打印信息:
Scanning device for bad blocks
Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x000000000000-0x000000040000 : "EmbedSky_Board_uboot"
0x000000200000-0x000000400000 : "EmbedSky_Board_kernel"
0x000000400000-0x00000ff80000 : "EmbedSky_Board_yaffs2"
usbmon: debugfs is not available
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
mice: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
s3c2410-rtc s3c2410-rtc: setting system clock to 2010-05-17 11:43:42 UTC (1274096622)
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs2
usb 1-1: new low speed USB device using s3c2410-ohci and address 2
usb 1-1: configuration #1 chosen from 1 choice
input: SIGMACH1P U+P Mouse as /class/input/input0
generic-usb 0003:1C4F:0003.0001: input: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-s3c24xx-1/input0
usb 1-1: USB disconnect, address 2
usb 1-1: new low speed USB device using s3c2410-ohci and address 3
usb 1-1: configuration #1 chosen from 1 choice
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
input: SIGMACH1P U+P Mouse as /class/input/input1
generic-usb 0003:1C4F:0003.0002: input: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-s3c24xx-1/input0
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 420K
mac80211: Unknown symbol cfg80211_scan_done
mac80211: Unknown symbol regulatory_hint_11d
mac80211: Unknown symbol cfg80211_wext_giwscan
mac80211: Unknown symbol cfg80211_wext_giwname
mac80211: Unknown symbol cfg80211_wext_giwmode
mac80211: Unknown symbol cfg80211_wext_giwrange
mac80211: Unknown symbol wiphy_register
mac80211: Unknown symbol wiphy_new
mac80211: Unknown symbol cfg80211_put_bss
mac80211: Unknown symbol cfg80211_hold_bss
mac80211: Unknown symbol cfg80211_send_rx_auth
mac80211: Unknown symbol cfg80211_send_rx_disassoc
mac80211: Unknown symbol wiphy_unregister
mac80211: Unknown symbol ieee80211_radiotap_iterator_init
mac80211: Unknown symbol cfg80211_get_bss
mac80211: Unknown symbol __ieee80211_get_channel
mac80211: Unknown symbol cfg80211_wext_siwmode
mac80211: Unknown symbol cfg80211_send_rx_assoc
mac80211: Unknown symbol ieee80211_radiotap_iterator_next
mac80211: Unknown symbol ieee80211_channel_to_frequency
mac80211: Unknown symbol cfg80211_wext_siwscan
mac80211: Unknown symbol cfg80211_inform_bss_frame
mac80211: Unknown symbol ieee80211_frequency_to_channel
mac80211: Unknown symbol cfg80211_send_rx_deauth
mac80211: Unknown symbol cfg80211_unhold_bss
mac80211: Unknown symbol cfg80211_unlink_bss
mac80211: Unknown symbol wiphy_free
insmod: cannot insert '/lib/mac80211.ko': unknown symbol in module, or unknown parameter
rt2x00lib: Unknown symbol ieee80211_register_hw
rt2x00lib: Unknown symbol ieee80211_get_hdrlen_from_skb
rt2x00lib: Unknown symbol ieee80211_wake_queue
rt2x00lib: Unknown symbol ieee80211_tx_status_irqsafe
rt2x00lib: Unknown symbol ieee80211_ctstoself_get
rt2x00lib: Unknown symbol ieee80211_wake_queues
rt2x00lib: Unknown symbol ieee80211_iterate_active_interfaces
rt2x00lib: Unknown symbol ieee80211_stop_queue
rt2x00lib: Unknown symbol ieee80211_stop_queues
rt2x00lib: Unknown symbol ieee80211_iterate_active_interfaces_atomic
rt2x00lib: Unknown symbol ieee80211_channel_to_frequency
rt2x00lib: Unknown symbol ieee80211_unregister_hw
rt2x00lib: Unknown symbol ieee80211_rts_get
rt2x00lib: Unknown symbol ieee80211_beacon_get
rt2x00lib: Unknown symbol ieee80211_rx_irqsafe
insmod: cannot insert '/lib/rt2x00lib.ko': unknown symbol in module, or unknown parameter
rt2x00usb: Unknown symbol rt2x00lib_probe_dev
rt2x00usb: Unknown symbol ieee80211_free_hw
rt2x00usb: Unknown symbol ieee80211_alloc_hw
rt2x00usb: Unknown symbol rt2x00lib_rxdone
rt2x00usb: Unknown symbol rt2x00lib_remove_dev
rt2x00usb: Unknown symbol rt2x00lib_txdone
rt2x00usb: Unknown symbol rt2x00queue_get_queue
insmod: cannot insert '/lib/rt2x00usb.ko': unknown symbol in module, or unknown parameter
rt73usb: Unknown symbol rt2x00mac_add_interface
rt73usb: Unknown symbol crc_itu_t_table
rt73usb: Unknown symbol rt2x00mac_get_stats
rt73usb: Unknown symbol rt2x00usb_disable_radio
rt73usb: Unknown symbol rt2x00mac_set_key
rt73usb: Unknown symbol rt2x00usb_vendor_request_buff
rt73usb: Unknown symbol rt2x00usb_vendor_request_large_buff
rt73usb: Unknown symbol rt2x00usb_kick_tx_queue
rt73usb: Unknown symbol rt2x00usb_write_tx_data
rt73usb: Unknown symbol rt2x00mac_config_interface
rt73usb: Unknown symbol rt2x00mac_remove_interface
rt73usb: Unknown symbol rt2x00usb_vendor_request
rt73usb: Unknown symbol rt2x00usb_probe
rt73usb: Unknown symbol rt2x00mac_config
rt73usb: Unknown symbol rt2x00queue_get_queue
rt73usb: Unknown symbol rt2x00usb_clear_entry
rt73usb: Unknown symbol rt2x00mac_conf_tx
rt73usb: Unknown symbol rt2x00mac_start
rt73usb: Unknown symbol rt2x00mac_stop
rt73usb: Unknown symbol rt2x00mac_configure_filter
rt73usb: Unknown symbol rt2x00usb_disconnect
rt73usb: Unknown symbol rt2x00mac_tx
rt73usb: Unknown symbol rt2x00usb_vendor_req_buff_lock
rt73usb: Unknown symbol rt2x00mac_get_tx_stats
rt73usb: Unknown symbol rt2x00usb_regbusy_read
rt73usb: Unknown symbol rt2x00usb_kill_tx_queue
rt73usb: Unknown symbol crc_itu_t
rt73usb: Unknown symbol rt2x00usb_uninitialize
rt73usb: Unknown symbol rt2x00usb_initialize
rt73usb: Unknown symbol rt2x00mac_bss_info_changed
insmod: cannot insert '/lib/rt73usb.ko': unknown symbol in module, or unknown parameter
zd1211rw: Unknown symbol ieee80211_free_hw
zd1211rw: Unknown symbol ieee80211_alloc_hw
zd1211rw: Unknown symbol regulatory_hint
zd1211rw: Unknown symbol ieee80211_register_hw
zd1211rw: Unknown symbol ieee80211_tx_status_irqsafe
zd1211rw: Unknown symbol ieee80211_wake_queues
zd1211rw: Unknown symbol ieee80211_stop_queues
zd1211rw: Unknown symbol ieee80211_unregister_hw
zd1211rw: Unknown symbol ieee80211_beacon_get
zd1211rw: Unknown symbol ieee80211_rx_irqsafe
insmod: cannot insert '/lib/zd1211rw.ko': unknown symbol in module, or unknown parameter
initializing s3c2440 camera interface......
s3c2440 camif init done
Loading OV9650 driver.........
OV9650 address 0x60, manufacture ID 0x0000, expect 0x7FA2
OV9650 address 0x60, manufacture ID 0x0000, expect 0x7FA2
No OV9650 found!!!
Try to bring eth0 interface up ...
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCSIFHWADDR: No such device
ifconfig eth0 hw ether 10:23:45:67:89:ab
ifconfig: SIOCSIFADDR: No such device
ifconfig eth0 192.168.1.6 netmask 255.255.255.0 up
route: SIOCADDRT: Network is unreachable
add default gw 192.168.1.2
Done
[17/May/2010:11:43:54 +0000] Start Qtopia-2.2.0
boa: server version Boa/0.94.13
[17/May/2010:11:43:54 +0000] boa: server built Jul 29 2009 at 14:27:34.
[17/May/2010:11:43:54 +0000] boa: starting server pid=1029, port 80

Please press Enter to activate this console. [9;0][?33l[?25lSegmentation fault

[root@EmbedSky /]#

不带鼠标年能正常进入的新
GPIO-Control initialized
PWM-Test initialized
adc initialized
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
s3c2440-uart.0: tq2440_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: tq2440_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: tq2440_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nand s3c2440-nand: Tacls=3, 30ns Twrph0=7 70ns, Twrph1=3 30ns
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
Scanning device for bad blocks
Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x000000000000-0x000000040000 : "EmbedSky_Board_uboot"
0x000000200000-0x000000400000 : "EmbedSky_Board_kernel"
0x000000400000-0x00000ff80000 : "EmbedSky_Board_yaffs2"
usbmon: debugfs is not available
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
mice: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
s3c2410-rtc s3c2410-rtc: setting system clock to 2010-05-17 11:56:36 UTC (1274097396)
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs2
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
Partially written block 1738 detected
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 420K
mac80211: Unknown symbol cfg80211_scan_done
mac80211: Unknown symbol regulatory_hint_11d
mac80211: Unknown symbol cfg80211_wext_giwscan
mac80211: Unknown symbol cfg80211_wext_giwname
mac80211: Unknown symbol cfg80211_wext_giwmode
mac80211: Unknown symbol cfg80211_wext_giwrange
mac80211: Unknown symbol wiphy_register
mac80211: Unknown symbol wiphy_new
mac80211: Unknown symbol cfg80211_put_bss
mac80211: Unknown symbol cfg80211_hold_bss
mac80211: Unknown symbol cfg80211_send_rx_auth
mac80211: Unknown symbol cfg80211_send_rx_disassoc
mac80211: Unknown symbol wiphy_unregister
mac80211: Unknown symbol ieee80211_radiotap_iterator_init
mac80211: Unknown symbol cfg80211_get_bss
mac80211: Unknown symbol __ieee80211_get_channel
mac80211: Unknown symbol cfg80211_wext_siwmode
mac80211: Unknown symbol cfg80211_send_rx_assoc
mac80211: Unknown symbol ieee80211_radiotap_iterator_next
mac80211: Unknown symbol ieee80211_channel_to_frequency
mac80211: Unknown symbol cfg80211_wext_siwscan
mac80211: Unknown symbol cfg80211_inform_bss_frame
mac80211: Unknown symbol ieee80211_frequency_to_channel
mac80211: Unknown symbol cfg80211_send_rx_deauth
mac80211: Unknown symbol cfg80211_unhold_bss
mac80211: Unknown symbol cfg80211_unlink_bss
mac80211: Unknown symbol wiphy_free
insmod: cannot insert '/lib/mac80211.ko': unknown symbol in module, or unknown parameter
rt2x00lib: Unknown symbol ieee80211_register_hw
rt2x00lib: Unknown symbol ieee80211_get_hdrlen_from_skb
rt2x00lib: Unknown symbol ieee80211_wake_queue
rt2x00lib: Unknown symbol ieee80211_tx_status_irqsafe
rt2x00lib: Unknown symbol ieee80211_ctstoself_get
rt2x00lib: Unknown symbol ieee80211_wake_queues
rt2x00lib: Unknown symbol ieee80211_iterate_active_interfaces
rt2x00lib: Unknown symbol ieee80211_stop_queue
rt2x00lib: Unknown symbol ieee80211_stop_queues
rt2x00lib: Unknown symbol ieee80211_iterate_active_interfaces_atomic
rt2x00lib: Unknown symbol ieee80211_channel_to_frequency
rt2x00lib: Unknown symbol ieee80211_unregister_hw
rt2x00lib: Unknown symbol ieee80211_rts_get
rt2x00lib: Unknown symbol ieee80211_beacon_get
rt2x00lib: Unknown symbol ieee80211_rx_irqsafe
insmod: cannot insert '/lib/rt2x00lib.ko': unknown symbol in module, or unknown parameter
rt2x00usb: Unknown symbol rt2x00lib_probe_dev
rt2x00usb: Unknown symbol ieee80211_free_hw
rt2x00usb: Unknown symbol ieee80211_alloc_hw
rt2x00usb: Unknown symbol rt2x00lib_rxdone
rt2x00usb: Unknown symbol rt2x00lib_remove_dev
rt2x00usb: Unknown symbol rt2x00lib_txdone
rt2x00usb: Unknown symbol rt2x00queue_get_queue
insmod: cannot insert '/lib/rt2x00usb.ko': unknown symbol in module, or unknown parameter
rt73usb: Unknown symbol rt2x00mac_add_interface
rt73usb: Unknown symbol crc_itu_t_table
rt73usb: Unknown symbol rt2x00mac_get_stats
rt73usb: Unknown symbol rt2x00usb_disable_radio
rt73usb: Unknown symbol rt2x00mac_set_key
rt73usb: Unknown symbol rt2x00usb_vendor_request_buff
rt73usb: Unknown symbol rt2x00usb_vendor_request_large_buff
rt73usb: Unknown symbol rt2x00usb_kick_tx_queue
rt73usb: Unknown symbol rt2x00usb_write_tx_data
rt73usb: Unknown symbol rt2x00mac_config_interface
rt73usb: Unknown symbol rt2x00mac_remove_interface
rt73usb: Unknown symbol rt2x00usb_vendor_request
rt73usb: Unknown symbol rt2x00usb_probe
rt73usb: Unknown symbol rt2x00mac_config
rt73usb: Unknown symbol rt2x00queue_get_queue
rt73usb: Unknown symbol rt2x00usb_clear_entry
rt73usb: Unknown symbol rt2x00mac_conf_tx
rt73usb: Unknown symbol rt2x00mac_start
rt73usb: Unknown symbol rt2x00mac_stop
rt73usb: Unknown symbol rt2x00mac_configure_filter
rt73usb: Unknown symbol rt2x00usb_disconnect
rt73usb: Unknown symbol rt2x00mac_tx
rt73usb: Unknown symbol rt2x00usb_vendor_req_buff_lock
rt73usb: Unknown symbol rt2x00mac_get_tx_stats
rt73usb: Unknown symbol rt2x00usb_regbusy_read
rt73usb: Unknown symbol rt2x00usb_kill_tx_queue
rt73usb: Unknown symbol crc_itu_t
rt73usb: Unknown symbol rt2x00usb_uninitialize
rt73usb: Unknown symbol rt2x00usb_initialize
rt73usb: Unknown symbol rt2x00mac_bss_info_changed
insmod: cannot insert '/lib/rt73usb.ko': unknown symbol in module, or unknown parameter
zd1211rw: Unknown symbol ieee80211_free_hw
zd1211rw: Unknown symbol ieee80211_alloc_hw
zd1211rw: Unknown symbol regulatory_hint
zd1211rw: Unknown symbol ieee80211_register_hw
zd1211rw: Unknown symbol ieee80211_tx_status_irqsafe
zd1211rw: Unknown symbol ieee80211_wake_queues
zd1211rw: Unknown symbol ieee80211_stop_queues
zd1211rw: Unknown symbol ieee80211_unregister_hw
zd1211rw: Unknown symbol ieee80211_beacon_get
zd1211rw: Unknown symbol ieee80211_rx_irqsafe
insmod: cannot insert '/lib/zd1211rw.ko': unknown symbol in module, or unknown parameter
initializing s3c2440 camera interface......
s3c2440 camif init done
Loading OV9650 driver.........
OV9650 address 0x60, manufacture ID 0x0000, expect 0x7FA2
OV9650 address 0x60, manufacture ID 0x0000, expect 0x7FA2
No OV9650 found!!!
Try to bring eth0 interface up ...
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCSIFHWADDR: No such device
ifconfig eth0 hw ether 10:23:45:67:89:ab
ifconfig: SIOCSIFADDR: No such device
ifconfig eth0 192.168.1.6 netmask 255.255.255.0 up
route: SIOCADDRT: Network is unreachable
add default gw 192.168.1.2
Done
[17/May/2010:11:56:48 +0000] Start Qtopia-2.2.0
boa: server version Boa/0.94.13
[17/May/2010:11:56:48 +0000] boa: server built Jul 29 2009 at 14:27:34.
[17/May/2010:11:56:48 +0000] boa: starting server pid=1002, port 80

Please press Enter to activate this console. [9;0][?33l[?25lCannot open touchscreen /dev/event0 (No such file or directory)
Cannot open /dev/mouse0 (No such file or directory)

[root@EmbedSky /]# Warning: Generating '/opt/Qtopia/etc/dict/words' dawg from word list.
Warning: could not register server

以上是修改过后的打印信息,由于字数的限制,省略了一部分信息

你确认修改了8楼中我给你说的那个位置的内容吗？
你提供打印信息只需要提供
[17/May/2010:11:56:48 +0000] Start Qtopia-2.2.0
boa: server version Boa/0.94.13
[17/May/2010:11:56:48 +0000] boa: server built Jul 29 2009 at 14:27:34.
[17/May/2010:11:56:48 +0000] boa: starting server pid=1002, port 80

Please press Enter to activate this console.
这里开始的内容就行了，其他的就不需要提供了。

按您的要求对/bin/qtopia文件做如下修改：
#!/bin/sh

echo Start Qtopia-2.2.0 > /dev/tq2440_serial0

export set TSLIB_TSDEVICE=/dev/event0
export set TSLIB_CONFFILE=/etc/ts.conf
export set TSLIB_PLUGINDIR=/lib/ts
export set TSLIB_CALIBFILE=/etc/pointercal
export set HOME=/root
export set QTDIR=/opt/Qtopia
export set QPEDIR=/opt/Qtopia
export set KDEDIR=/opt/kde
export set QWS_KEYBOARD="TTY:/dev/tty1"
export set QWS_MOUSE_PROTO="TPanel:/dev/event0 USB:/dev/mouse0"
export set PATH=$QPEDIR/bin:$PATH
export set LD_LIBRARY_PATH=$QTDIR/lib:$QPEDIR/lib
if [ -f /etc/pointercal ] ; then
        $QPEDIR/bin/qpe
else
        ts_calibrate
        $QPEDIR/bin/qpe
fi
保存重启得到如下串口打印信息
1. 插鼠标不能进入的Qtopia界面的打印信息:   [24/May/2010:12:00:34 +0000] Start Qtopia-2.2.0
boa: server version Boa/0.94.13
[24/May/2010:12:00:34 +0000] boa: server built Jul 29 2009 at 14:27:34.
[24/May/2010:12:00:34 +0000] boa: starting server pid=1011, port 80

Please press Enter to activate this console. Segmentation fault

[root@EmbedSky /]#

2。不带鼠标年能正常进入qtopia界面的串口信息：[24/May/2010:12:02:01 +0000] Start Qtopia-2.2.0
boa: server version Boa/0.94.13
[24/May/2010:12:02:01 +0000] boa: server built Jul 29 2009 at 14:27:34.
[24/May/2010:12:02:01 +0000] boa: starting server pid=1002, port 80

Please press Enter to activate this console. Cannot open touchscreen /dev/event0
(No such file or directory)
Cannot open /dev/mouse0 (No such file or directory)
Warning: Generating '/opt/Qtopia/etc/dict/words' dawg from word list.
Warning: could not register server

[root@EmbedSky /]#

你将附件中的文件复制到你的开发板的文件系统的etc目录下，然后启动开发板你看能不能正常启动呢。

可以启动了,非常感谢! 再问亚瑟王,怎么不能支持鼠标热插拔呢,是鼠标驱动原因造成的还是,还是qtopia的原因造成的呢?