|
11# embedsky_lxt
usb 1-1: new full speed USB device using s3c2410-ohci and address 2
usb 1-1: New USB device found, idVendor=1221, idProduct=3234
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: HYUNDAI
usb 1-1: Manufacturer: USB2.
usb 1-1: SerialNumber: 0000024150000574
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 180K
scsi 0:0:0:0: Direct-Access USB2.0 HYUNDAI 2.10 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 4114506 512-byte hardware sectors: (2.10 GB/1.96 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda:
sd 0:0:0:0: [sda] Attached SCSI removable disk
usbcore: registered new interface driver rt73usb
usbcore: registered new interface driver zd1211rw
initializing s3c2440 camera interface......
s3c2440 camif init done
Loading OV9650 driver.........
OV9650 address 0x60, manufacture ID 0xFFFF, expect 0x7FA2
OV9650 address 0x60, manufacture ID 0xFFFF, expect 0x7FA2
No OV9650 found!!!
Try to bring eth0 interface up ...
ifconfig eth0 hw ether 10:23:45:67:89:ab
eth0: link down
ifconfig eth0 192.168.1.6 netmask 255.255.255.0 up
add default gw 192.168.1.2
Done
[09/Nov/2010:04:01:52 +0000] Start Qtopia-2.2.0
boa: server version Boa/0.94.13
[09/Nov/2010:04:01:52 +0000] boa: server built Jul 29 2009 at 14:27:34.
[09/Nov/2010:04:01:52 +0000] boa: starting server pid=496, port 80
Please press Enter to activate this console. [root@EmbedSky /]#
[root@EmbedSky /]# ls -la /udisk
ls: /udisk: No such file or directory
这是我开机时候的一段页面,我看是显示挂在上U盘了 可是没有 /udisk/ 这个文件夹啊! |
|