|
我用光盘自带的2.6.30.4源码,只是改了llinux开机图片,直接编译Image.bin 文件烧入开发板启动后有下面错误,但是启动正常。。。。不知道这是不是错误,影响使用吗?
Start Qtopia-2.2.0
[ 5.320000] input_polldev: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4-EmbedSKy mod_unload ARMv4 '
insmod: can't insert '/lib/input-polldev.ko': invalid module format
[ 5.415000] mac80211: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4-EmbedSKy mod_unload ARMv4 '
insmod: can't insert '/lib/mac80211.ko': invalid module format
[ 5.460000] rt2x00lib: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4-EmbedSKy mod_unload ARMv4 '
insmod: can't insert '/lib/rt2x00lib.ko': invalid module format
[ 5.490000] rt2x00usb: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4-EmbedSKy mod_unload ARMv4 '
insmod: can't insert '/lib/rt2x00usb.ko': invalid module format
[ 5.555000] rt73usb: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4-EmbedSKy mod_unload ARMv4 '
insmod: can't insert '/lib/rt73usb.ko': invalid module format
[ 5.630000] zd1211rw: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4-EmbedSKy mod_unload ARMv4 '
insmod: can't insert '/lib/zd1211rw.ko': invalid module format
[ 5.685000] ov9650: version magic '2.6.30.4-EmbedSky mod_unload ARMv4 ' should be '2.6.30.4-EmbedSKy mod_unload ARMv4 '
insmod: can't insert '/lib/ov9650.ko': invalid module format
Try to bring eth0 interface up ...
ifconfig eth0 hw ether 10:23:45:67:89:ab
[ 5.980000] eth0: link down
ifconfig eth0 100.210.120.100 netmask 255.255.255.0 up
add default gw 100.210.120.254
Done
[30/Apr/2011:16:08:09 +0000] boa: server version Boa/0.94.13
[30/Apr/2011:16:08:09 +0000] boa: server built Jul 29 2009 at 14:27:34.
Please press Enter to activate this console. [30/Apr/2011:16:08:09 +0000] boa: starting server pid=470, port 80
[ 8.020000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 |
|